https://community.cisco.com/t5/network-security/nat-in-ftd/m-p/3928008#M132471 <P>You do not need NAT here, follow below document for reference :</P> <P>&nbsp;</P> <P>&nbsp;</P> <P><A href="https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/200908-configuring-firepower-threat-defense-int.html" target="_blank">https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/200908-configuring-firepower-threat-defense-int.html</A></P> Sat, 21 Sep 2019 20:46:59 GMT balaji.bandi 2019-09-21T20:46:59Z https://community.cisco.com/t5/network-security/nat-in-ftd/m-p/3927974#M132470 <P>Hi Guys, just want to double check with you. In FTD, I have 2 subnet and if I need to have intervlan for those 2 VLAN, do I still need to configure an identity NAT or any NAT?</P><P>My target is doing intervlan routing between the 2 VLAN without any IP change.</P><P>thanks</P> Sat, 21 Sep 2019 15:23:44 GMT https://community.cisco.com/t5/network-security/nat-in-ftd/m-p/3927974#M132470 fatalXerror 2019-09-21T15:23:44Z https://community.cisco.com/t5/network-security/nat-in-ftd/m-p/3928008#M132471 <P>You do not need NAT here, follow below document for reference :</P> <P>&nbsp;</P> <P>&nbsp;</P> <P><A href="https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/200908-configuring-firepower-threat-defense-int.html" target="_blank">https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/200908-configuring-firepower-threat-defense-int.html</A></P> Sat, 21 Sep 2019 20:46:59 GMT https://community.cisco.com/t5/network-security/nat-in-ftd/m-p/3928008#M132471 balaji.bandi 2019-09-21T20:46:59Z