topic Re: deployment failed due to conflict with ongoing prevlous deployment in Network Security

deployment failed due to conflict with ongoing prevlous deployment

Eccom-TAC — Tue, 13 Feb 2018 06:40:59 GMT

when configuration the Static routing on the ASA to FMC , it cannot deploy to FTD2110. after on the FMC configuration is distributed to the FP , not issued by success, error screenshot below

deployment failed due to conflict with ongoing prevlous deployment. if problem persists after retrying, contact cisco TAC

Re: deployment failed due to conflict with ongoing prevlous deployment

yasirirfan — Wed, 14 Feb 2018 22:40:50 GMT

Hi Xuehau

Try to clear any pending tasks from Deploy > tasks tab and the try. It should work.

Cheers

Yasir

Re: deployment failed due to conflict with ongoing prevlous deployment

Raghunath Kulkarni — Fri, 16 Feb 2018 01:48:07 GMT

Hi Xiehau,

This usually happens due to the CD_STATE (one of the internal flag files) being inconsistent which leads to this issue being reported.

It requires making certain changes from the root account of the FTD units, hence i would recommend if you open up a TAC case the engineer should be able to fix it quickly.

P.S: We could have done it here but since it needs information from the device to avoid data being shared publicly lets open a SR

Re: deployment failed due to conflict with ongoing prevlous deployment

Miguel52 — Wed, 07 Aug 2019 21:17:57 GMT

Hi,

I solved this problem restarting the manager service in expert module on FTD

>expert
Password:
firepower:/home/root# pmtool restartbyid ngfwManager