topic Change nameif outside to another interface in Network Security https://community.cisco.com/t5/network-security/change-nameif-outside-to-another-interface/m-p/3586699#M133084 <HTML><HEAD></HEAD><BODY><P>I am in the process of migrating to a new internet connection. Today, the ASA terminates the internet circuit in G0/0. The new internet connection terminates on a separate router.</P><P></P><P class="p1">Interface G0/0</P><P class="p1">description Internet Interface</P><P class="p1">nameif outside</P><P class="p1">ip address x.x.x.x 255.255.255.248 standby x.x.x.x</P><P class="p1"></P><P class="p1">I want to migrate the nameif outside to a port-channel interface on the same ASA. Can you please help me identify how to best accomplish this without damaging the configuration? It is my understanding that if I issue a " no nameif outside" on g0/0, the configuration would be damaged.</P><P class="p1"></P><P class="p1">Interface port-channel2.902</P><P class="p1">Description NTT_Internet_LAN</P><P class="p1">VLAN 902</P><P class="p1">nameif outside</P><P class="p1">Security-level 0</P><P class="p1">IP address x.x.x.x 255.255.255.248 standby x.x.x.x</P></BODY></HTML> Tue, 28 Nov 2017 14:36:52 GMT mschlenger 2017-11-28T14:36:52Z Change nameif outside to another interface https://community.cisco.com/t5/network-security/change-nameif-outside-to-another-interface/m-p/3586699#M133084 <HTML><HEAD></HEAD><BODY><P>I am in the process of migrating to a new internet connection. Today, the ASA terminates the internet circuit in G0/0. The new internet connection terminates on a separate router.</P><P></P><P class="p1">Interface G0/0</P><P class="p1">description Internet Interface</P><P class="p1">nameif outside</P><P class="p1">ip address x.x.x.x 255.255.255.248 standby x.x.x.x</P><P class="p1"></P><P class="p1">I want to migrate the nameif outside to a port-channel interface on the same ASA. Can you please help me identify how to best accomplish this without damaging the configuration? It is my understanding that if I issue a " no nameif outside" on g0/0, the configuration would be damaged.</P><P class="p1"></P><P class="p1">Interface port-channel2.902</P><P class="p1">Description NTT_Internet_LAN</P><P class="p1">VLAN 902</P><P class="p1">nameif outside</P><P class="p1">Security-level 0</P><P class="p1">IP address x.x.x.x 255.255.255.248 standby x.x.x.x</P></BODY></HTML> Tue, 28 Nov 2017 14:36:52 GMT https://community.cisco.com/t5/network-security/change-nameif-outside-to-another-interface/m-p/3586699#M133084 mschlenger 2017-11-28T14:36:52Z