Loopback NAT at ASA

Tue, 12 Mar 2019 09:48:16 GMT

Hello, community

Got the challenge:

We have ASA 5515 (asa962-smp-k8, asdm-762)

_____

Inside1 -> | 5515 | -> outside1 (default route)

Inside2 -> |_____| -> outside2

I need that server from Inside1 connect to outside2:443 and get to server at Inside2:443
By the current configuration Inside1 is nated to world via outside1

How should i configure it?

I'm CCNP RS, but it's my first time with ASA.

Thanks in advance!

Is there any reason why you

Marvin Rhoads — Thu, 10 Aug 2017 15:47:47 GMT

Is there any reason why you can't allow Inside1 server to talk directly to Inside2 server?

If they are both same security level interfaces then you just permit same-security inter-interface. If either has an input ACL then you need to allow the traffic explicitly in the ACL(s).

topic Loopback NAT at ASA in Network Security

Loopback NAT at ASA

Is there any reason why you