https://community.cisco.com/t5/network-security/asa-acl-hit-count-information/m-p/3089891#M133439 <P>Reload will reset the hit counts on ACLs</P> <P>hit counts won't replicae.</P> Wed, 09 Aug 2017 05:52:38 GMT Mohammed al Baqari 2017-08-09T05:52:38Z https://community.cisco.com/t5/network-security/asa-acl-hit-count-information/m-p/3089890#M133438 <P>Hello,</P> <P></P> <P>I have two firewalls in active/standby if I reboot standby and after when it goes up, I make no failover active on active one to force it to go in standby then reboot it.</P> <P></P> <P>Will ACL hit count will be reset after that action ?!</P> <P></P> <P>Also if primary one is active and I make no failover active to work on secondary one will ACL hit count be same on both devices ?!</P> <P></P> <P>please if anyone explain this topic it will be nice for better understanding,.</P> <P></P> <P>thanks.</P> Tue, 12 Mar 2019 09:47:36 GMT https://community.cisco.com/t5/network-security/asa-acl-hit-count-information/m-p/3089890#M133438 engahmedsaied 2019-03-12T09:47:36Z https://community.cisco.com/t5/network-security/asa-acl-hit-count-information/m-p/3089891#M133439 <P>Reload will reset the hit counts on ACLs</P> <P>hit counts won't replicae.</P> Wed, 09 Aug 2017 05:52:38 GMT https://community.cisco.com/t5/network-security/asa-acl-hit-count-information/m-p/3089891#M133439 Mohammed al Baqari 2017-08-09T05:52:38Z