topic FTD Anyconnect Client in Network Security

FTD Anyconnect Client

JASON BOYERS — Tue, 18 Jul 2017 16:06:39 GMT

Is there a minimum version level required for the Anyconnect client beyond it being a 4.x version when connecting to the FTD 2100? I've looked at the AC compatibility guide, but it only lists ASA versions.

Re: FTD Anyconnect Client

Juaguerr — Wed, 09 Aug 2017 19:37:38 GMT

Hi j.boyers

The version supported on the FP2100 with FTD 6.2.1 is AC 4.0 + . So basically any 4.x version.

You can find the info here

https://www.cisco.com/c/en/us/td/docs/security/firepower/compatibility/firepower-compatibility.html

Firepower System Version	Cisco Firepower System User Agent	Cisco AMP Threat Grid	Cisco Terminal Services (TS) Agent	Cisco AnyConnect Secure Mobility Client	Cisco Identity Services Engine (ISE)
Firepower System Version	Cisco Firepower System User Agent	Cisco AMP Threat Grid	Cisco Terminal Services (TS) Agent	Cisco AnyConnect Secure Mobility Client	ISE	ISE-PIC
5.3.x	2.2 +	—	—	—	—	—
5.4.x	2.2 +	—	—	—	—	—
6.0.x.x	2.3 +	1.4.2 +	—	—	1.3	—
6.1.x.x	2.3 +	1.4.2 +	—	—	1.3 2.0 and 2.0.1 2.1	—
6.2.0.x	2.3 +	1.4.2 +	1.0	—	1.3 2.0 and 2.0.1 2.1	—
6.2.1	2.3 +	2.1.4 +	1.0	4.0 +	2.0 and 2.0.1 2.1	2.2

Re: FTD Anyconnect Client

JASON BOYERS — Wed, 09 Aug 2017 20:27:01 GMT

Thanks! Didn't see that when I was looking.