topic Re: FMC not showing events in Network Security

FMC not showing events

hashimwajid1 — Tue, 12 Mar 2019 09:36:32 GMT

Hi Experts

I've deployed 2 x ASA 5525x in HA. both devices have added in FMC. i can see that traffic is passing through the SFR module by using sh service policy command. but vFMC is not showing any event on dash board.

- i've created a basic policy on FMC and pushed it toward firewalls.

- logs are enable in policy

- i am using vFMC 6.2.1/ SFR 6.2.0/ IOS 9.6.3 image

Regards

Can you share a screen shot

Marvin Rhoads — Tue, 20 Jun 2017 04:32:14 GMT

Can you share a screen shot of your Access Control Policy with logging enabled?

Make sure to follow below

prashant dwivedi — Tue, 20 Jun 2017 06:41:04 GMT

Make sure to follow below path :

on the main page >> Analysis >> Connections >> Events

Ensure Firewall is having traffic going through it, show conn would help

Re: FMC not showing events

Muhammad Azhar — Mon, 12 Nov 2018 20:52:17 GMT

Please enable logging in access control policy , i test it on FMCv 6.2.3.

Re: FMC not showing events

k.nandakumar — Tue, 13 Nov 2018 03:46:03 GMT

You may also check if Time is sync/same in both FTD and FMC.

Once common problem in eventing is, FTD sends event with different time stamp and FMC has different time, resulting no even shown up in FMC on expected time window.

Re: FMC not showing events

k.nandakumar — Tue, 13 Nov 2018 03:46:25 GMT

You may also check if Time is sync/same in both FTD and FMC.

Once common problem in eventing is, FTD sends event with different time stamp and FMC has different time, resulting no even shown up in FMC on expected time window.