topic Hi Sumanta, in Network Security

BGP support on Cisco ASA 9.2.1

Sumanta Ghosh — Tue, 12 Mar 2019 09:18:09 GMT

Hi Experts

What is meant by the below? ASA Software Version 9.2.1.

The BGP IPv4 address family is supported in both single mode and multi-mode.
Multi-mode is equivalent to the Cisco IOS^® BGP VPNv4 (VPN Routing and Forwarding (VRF) address family). Per context router, BGP is similar to per VRF IPv4 address family in Cisco IOS.

Hi Sumanta,

Spooster IT Services — Tue, 02 May 2017 14:50:54 GMT

Hi Sumanta,

In Multi-mode, you can partition a single ASA into multiple virtual devices, known as security contexts. Each context acts as an independent device, with its own security policy, interfaces, and administrators. Multiple contexts similar to having multiple standalone devices. Cisco IOS BGP VPNv4 and Multi-mode is only similar that you can differentiate the routing between the customers/departments etc.

Hi Team

Sumanta Ghosh — Mon, 15 May 2017 18:21:53 GMT

Hi Team

Thanks a lot. Can we expect the same on FP9300 running FTD latest image? Anything in roadmap, if not supported?

In FP9300 running FTD latest

Spooster IT Services — Mon, 15 May 2017 19:17:22 GMT

In FP9300 running FTD latest image, BGP is supported only in router mode but not support transparent firewall mode. Following is the link having information.

http://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/bgp_for_firepower_threat_defense.html

Hi Experts

Sumanta Ghosh — Tue, 16 May 2017 16:05:36 GMT

Hi Experts

Thanks. Do we have mutiple contexts in FTD as well, so as to run BGP in each VRF? Similar to ASA?