Cisco NGFW 4100 features

ymadheka — Tue, 12 Mar 2019 08:33:52 GMT

Hi Team,

Iam not able to locate documentation of the features as below in cisco NGFW 4110:

Support of 10Gbps Multi-mode Fiber ports
For this model, how the control panels work on each firewall when deployed in cluster?
Does this model support Auto Failover and Failback Solution?
For the suggested model, how the control panels work on each firewall when deployed in cluster?
Which formats are supported for SIEM?

Thanks & Regards,

Yogesh Madhekar

Hello Yogesh-

nspasov — Mon, 21 Nov 2016 19:26:49 GMT

Hello Yogesh-

My answers below:

Support of 10Gbps Multi-mode Fiber ports

NS: Can you clarify on what additional information you need here? The FP4100 series come with 8 x 10Gb SFP based ports and 2 slots for network modules that you can use to add additional 10Gb or 40Gb ports. Here is a link for the data sheet that I think you will find helpful:

http://www.cisco.com/c/dam/en/us/products/collateral/security/firepower-4100-series/datasheet-c78-736661.pdf

For this model, how the control panels work on each firewall when deployed in cluster?

NS: Again, can you please expand on exactly what you are looking for here. (Also, keep in mind that clustering is only supported in ASA mode. FTD clustering is on the road-map but not available today).

Does this model support Auto Failover and Failback Solution?

NS: If you are running ASA mode then all H/A options that you have with a regular ASA are available (Active/Standby, Active/Active, Clustering). With FTD, the only H/A option today is Active/Standby with Clustering and Active/Active on the road-map.

For the suggested model, how the control panels work on each firewall when deployed in cluster?

NS: Please clarify/expand on what information you are looking for here. Each appliance has a single supervisor running the new FX-OS image.

Which formats are supported for SIEM?

NS: This would depend if you are running FTD or ASA mode. With ASA, you will get the same features as if you were running a regular ASA. With FTD, integration will happen via the management console (FirePOWER Management Center).

I hope this helps!

Thank you for rating helpful posts!

topic Hello Yogesh- in Network Security

Cisco NGFW 4100 features

Hello Yogesh-