https://community.cisco.com/t5/network-security/cisco-asa-and-dhcp-client-option-60-vendor-class-identifier-vci/m-p/3003334#M144825 <P>Hello there</P> <P></P> <P>One of our internet providers require Option 60 to be set in the DHCP client request to get an public IP and to be allowed on the network.</P> <P>Unfortunately, I was unable to find a configuration setting to provide option 60 during DHCP client operation on the outside interface. There is one for option 61 though (aka Client-ID) ...</P> <P>Does anyone know if there is such a feature built in to the Cisco ASA 9.5.x or maybe the latest available version?</P> <P>If that would not be possible, one would be required to use a router in front of the ASA that then will perform NAT (ugly) ...</P> <P></P> <P>Thank you</P> <P>Beat</P> Tue, 12 Mar 2019 08:33:10 GMT nsbbu 2019-03-12T08:33:10Z https://community.cisco.com/t5/network-security/cisco-asa-and-dhcp-client-option-60-vendor-class-identifier-vci/m-p/3003334#M144825 <P>Hello there</P> <P></P> <P>One of our internet providers require Option 60 to be set in the DHCP client request to get an public IP and to be allowed on the network.</P> <P>Unfortunately, I was unable to find a configuration setting to provide option 60 during DHCP client operation on the outside interface. There is one for option 61 though (aka Client-ID) ...</P> <P>Does anyone know if there is such a feature built in to the Cisco ASA 9.5.x or maybe the latest available version?</P> <P>If that would not be possible, one would be required to use a router in front of the ASA that then will perform NAT (ugly) ...</P> <P></P> <P>Thank you</P> <P>Beat</P> Tue, 12 Mar 2019 08:33:10 GMT https://community.cisco.com/t5/network-security/cisco-asa-and-dhcp-client-option-60-vendor-class-identifier-vci/m-p/3003334#M144825 nsbbu 2019-03-12T08:33:10Z