topic It's very likely that this in Network Security https://community.cisco.com/t5/network-security/asa-5506-inside-port-configuration/m-p/3023979#M145474 <P>It's very likely that this problem is just an ASDM-problem. Configure it from the CLI and it will work.</P> Sat, 25 Mar 2017 20:26:56 GMT Karsten Iwen 2017-03-25T20:26:56Z asa 5506 inside port configuration https://community.cisco.com/t5/network-security/asa-5506-inside-port-configuration/m-p/3023978#M145465 <P>Every time I try to change the inside port IP, it fails. Nothing it written tot he ASA. I can change the outside from DHCP to any IP, but when I change the default 192.168.1.1 to my 172.20 .x.x scheme, nothing. Just the spinning cursor and the error box of death. I'm not sure the unit it working properly.</P> Tue, 12 Mar 2019 09:07:32 GMT https://community.cisco.com/t5/network-security/asa-5506-inside-port-configuration/m-p/3023978#M145465 william.paraskewik 2019-03-12T09:07:32Z It's very likely that this https://community.cisco.com/t5/network-security/asa-5506-inside-port-configuration/m-p/3023979#M145474 <P>It's very likely that this problem is just an ASDM-problem. Configure it from the CLI and it will work.</P> Sat, 25 Mar 2017 20:26:56 GMT https://community.cisco.com/t5/network-security/asa-5506-inside-port-configuration/m-p/3023979#M145474 Karsten Iwen 2017-03-25T20:26:56Z well - if you are using the https://community.cisco.com/t5/network-security/asa-5506-inside-port-configuration/m-p/3023980#M145488 <P>well - if you are using the ASDM it sounds to me that you commit suicide...</P> <P></P> Mon, 27 Mar 2017 11:36:54 GMT https://community.cisco.com/t5/network-security/asa-5506-inside-port-configuration/m-p/3023980#M145488 tiwang 2017-03-27T11:36:54Z