ASA packet tracer with VNI interface

Roman Pomazanov — Tue, 12 Mar 2019 09:02:29 GMT

Hello all!

I've successfully configured VXLAN support on ASA according official guide

(http://www.cisco.com/c/en/us/td/docs/security/asa/asa94/config-guides/cli/general/asa-94-general-config/interface-vxlan.pdf)

I have VXLAN-VXLAN routing and VXLAN-VLAN routing as well. All works fine (at least in lab) but i have a little concern. I can not use most useful instrument in ASA with VNI interfaces. I meant packet tracer. I just do not see them in interface list.

So, i have two "standart" interfaces and two VNI:

ciscoasa# sh ip
System IP Addresses:
Interface Name IP address Subnet mask Method
GigabitEthernet0/0 VXLAN_GW 10.0.0.1 255.255.255.252 CONFIG
GigabitEthernet0/1 Internal 172.30.40.1 255.255.255.0 CONFIG
vni1 vxlan5100 192.168.0.254 255.255.255.0 manual
vni2 vxlan6100 192.168.100.254 255.255.255.0 manual

But when i try to execute "packet tracer" i do not see VNI in list of available

ciscoasa# packet-tracer input ?

Current available interface(s):
Internal Name of interface GigabitEthernet0/1
VXLAN_GW Name of interface GigabitEthernet0/0
ciscoasa# packet-tracer input

Does anybody know maybe there is some other options to troubleshoot encapsulated traffic like packet tracer? Or it can be somehow turned on?

I use 9.4(1)200 version of software

Thanks in advance

topic ASA packet tracer with VNI interface in Network Security

ASA packet tracer with VNI interface