topic about nat , i wanna know if i in Network Security https://community.cisco.com/t5/network-security/2-isp-nat-and-pbr-issue/m-p/3013258#M146017 <P>about nat , i wanna know if i define subnet 10.0.1.x go isp1, then define 10.0.1.100 go isp2,</P> <P>what happen?</P> <P>and i in route-map, i configure <STRONG>match ip addr xxxxx,</STRONG> but cannot found <STRONG>set ip next-hop</STRONG></P> <P>what happen?</P> Mon, 06 Mar 2017 09:18:10 GMT ronald.su 2017-03-06T09:18:10Z 2 ISP NAT and PBR issue https://community.cisco.com/t5/network-security/2-isp-nat-and-pbr-issue/m-p/3013257#M146007 <P>hi guys,<BR /><BR />i need your help , many thx!<BR />it's about 2 ISP with NAT and PBR issue....here is my <SPAN id="result_box" class="short_text" lang="en"><SPAN class="">scenario</SPAN></SPAN>：<BR />i have an ASA 5508 with 2 isp boardband (assume each has 255 IP). and i have 3 subnet in office. 10.0.0.x/24 ; 10.0.1.x/24 ; 10.0.2.x/24<BR />i want the 10.0.2.x go isp-2 (202.0.0.1). others go isp-1(101.0.0.1)<BR />and some special IP (10.0.0.100) go ISP-2 (202.0.0.200). &nbsp;<BR /><BR />how to make it work?<BR /><BR /></P> Tue, 12 Mar 2019 09:01:03 GMT https://community.cisco.com/t5/network-security/2-isp-nat-and-pbr-issue/m-p/3013257#M146007 ronald.su 2019-03-12T09:01:03Z about nat , i wanna know if i https://community.cisco.com/t5/network-security/2-isp-nat-and-pbr-issue/m-p/3013258#M146017 <P>about nat , i wanna know if i define subnet 10.0.1.x go isp1, then define 10.0.1.100 go isp2,</P> <P>what happen?</P> <P>and i in route-map, i configure <STRONG>match ip addr xxxxx,</STRONG> but cannot found <STRONG>set ip next-hop</STRONG></P> <P>what happen?</P> Mon, 06 Mar 2017 09:18:10 GMT https://community.cisco.com/t5/network-security/2-isp-nat-and-pbr-issue/m-p/3013258#M146017 ronald.su 2017-03-06T09:18:10Z