https://community.cisco.com/t5/network-security/full-mesh-vpn-with-asa/m-p/3007606#M146469 <P>Yes you can, but it's the wrong tool for this task. On the ASA, all VPNs have to be configured individually which is much work.&nbsp;The better solution would be:</P> <UL> <LI>Build your VPN with <A href="https://meraki.cisco.com/technologies/auto-vpn">Cisco Meraki MX appliances</A></LI> <LI>Use Cisco Routers with <A href="http://www.cisco.com/c/en/us/products/collateral/security/dynamic-multipoint-vpn-dmvpn/data_sheet_c78-468520.html">DMVPN</A></LI> </UL> Wed, 15 Feb 2017 21:09:10 GMT Karsten Iwen 2017-02-15T21:09:10Z https://community.cisco.com/t5/network-security/full-mesh-vpn-with-asa/m-p/3007605#M146467 <P>Hi Experts,&nbsp;</P> <P>New to Cisco world here. I need to know if it is possible to create a full mesh site-to-site IPSec VPN using Cisco ASA firewalls. There are 8 sites to begin with and 21 sites in all.&nbsp;</P> <P></P> <P>Thanks in advance for your suggestions.</P> Tue, 26 Mar 2019 00:59:41 GMT https://community.cisco.com/t5/network-security/full-mesh-vpn-with-asa/m-p/3007605#M146467 umar.siddiqi 2019-03-26T00:59:41Z https://community.cisco.com/t5/network-security/full-mesh-vpn-with-asa/m-p/3007606#M146469 <P>Yes you can, but it's the wrong tool for this task. On the ASA, all VPNs have to be configured individually which is much work.&nbsp;The better solution would be:</P> <UL> <LI>Build your VPN with <A href="https://meraki.cisco.com/technologies/auto-vpn">Cisco Meraki MX appliances</A></LI> <LI>Use Cisco Routers with <A href="http://www.cisco.com/c/en/us/products/collateral/security/dynamic-multipoint-vpn-dmvpn/data_sheet_c78-468520.html">DMVPN</A></LI> </UL> Wed, 15 Feb 2017 21:09:10 GMT https://community.cisco.com/t5/network-security/full-mesh-vpn-with-asa/m-p/3007606#M146469 Karsten Iwen 2017-02-15T21:09:10Z