https://community.cisco.com/t5/network-security/asa-firewall/m-p/3032453#M146796 <P>Have you:</P> <UL> <LI>Created a VLAN2 and a VLAN3 on the switch?</LI> <LI>Configure the port going to the ISP to be a trunk port (assuming the ISP is presenting this on a single port)?</LI> <LI>Configured the port going to the ASA to be a trunk port?</LI> </UL> Mon, 06 Feb 2017 21:39:36 GMT Philip D'Ath 2017-02-06T21:39:36Z https://community.cisco.com/t5/network-security/asa-firewall/m-p/3032452#M146794 <P>Hi all,</P> <P>i wanna configure my asa to get access to 2 VPN link the first via gateway 10.240.20.1 and the second via 10.240.30.1 but the ISP router use the intervlan routing in both interfaces i have just 10.240.20.1 but i can ping 10.240.30.1 via 10.240.20.1 interface my architecture as following:</P> <P><IMG src="https://community.cisco.com/legacyfs/online/media/asa_router_2.jpg" class="migrated-markup-image" /></P> <P>when i connect my asa to switch and the switch to two ISP router interfaces i can ping 10.240.20.1 but i can't ping 10.240.30.1 from the ASA, what'is the problems?</P> <P>so in this case Can i configure route like this:</P> <P>route interfacevlan2 a.a.a.a 255.255.255.0 10.240.20.1</P> <P>route intefacevlan3 b.b.b.b 255.255.255.0 10.240.30.1&nbsp;</P> <P>this configuration is possible? the firwall can reach the 10.240.30.1 ?</P> Tue, 12 Mar 2019 08:53:38 GMT https://community.cisco.com/t5/network-security/asa-firewall/m-p/3032452#M146794 moussa.malqui1 2019-03-12T08:53:38Z https://community.cisco.com/t5/network-security/asa-firewall/m-p/3032453#M146796 <P>Have you:</P> <UL> <LI>Created a VLAN2 and a VLAN3 on the switch?</LI> <LI>Configure the port going to the ISP to be a trunk port (assuming the ISP is presenting this on a single port)?</LI> <LI>Configured the port going to the ASA to be a trunk port?</LI> </UL> Mon, 06 Feb 2017 21:39:36 GMT https://community.cisco.com/t5/network-security/asa-firewall/m-p/3032453#M146796 Philip D'Ath 2017-02-06T21:39:36Z