topic QM FSM error in Network Security

QM FSM error

k.adath2015 — Tue, 12 Mar 2019 08:42:00 GMT

Hi,

I am getting the contious error message firewall log

Group = 1.1.1.1, IP = 1.1.1.1, Removing peer from correlator table failed, no match!
Group = 1.1.1.1, IP = 1.1.1.1, QM FSM error (P2 struct &0x00007ffeddc38a30, mess id 0x2)!
Group = 1.1.1.1, IP = 1.1.1.1, Rejecting IPSec tunnel: no matching crypto map entry for remote proxy 172.16.10.0/255.255.0.0/0/0 local proxy 192.168.10.0/255.255.255.0/0/0 on interface Outside

Please help

Looks like there is another

Rahul Govindan — Fri, 23 Dec 2016 15:27:35 GMT

Looks like there is another device negotiating an IPsec tunnel with your ASA. Your ASA is probably not configured for it and drops the transaction as it cannot find matching entry. If you are expecting an IPsec tunnel to be terminated on the ASA, then either your or remote device is wrongly configured for IPsec.

Capture traffic on your outbound/outside interface for udp 500 traffic to determine which device is sending the request.