https://community.cisco.com/t5/network-security/cli-analyzer-output-interpreter/m-p/2996674#M148941 <P>The old interpreter you could paste from a router in to the tool. The new CLI? Do you have to be connected to a router for File Analysis? Previously this was not the case.</P> <P></P> <P>Thanks in advance for any tips.</P> Tue, 26 Mar 2019 00:59:27 GMT ticarey 2019-03-26T00:59:27Z https://community.cisco.com/t5/network-security/cli-analyzer-output-interpreter/m-p/2996674#M148941 <P>The old interpreter you could paste from a router in to the tool. The new CLI? Do you have to be connected to a router for File Analysis? Previously this was not the case.</P> <P></P> <P>Thanks in advance for any tips.</P> Tue, 26 Mar 2019 00:59:27 GMT https://community.cisco.com/t5/network-security/cli-analyzer-output-interpreter/m-p/2996674#M148941 ticarey 2019-03-26T00:59:27Z https://community.cisco.com/t5/network-security/cli-analyzer-output-interpreter/m-p/2996675#M148942 <P>Hi,</P> <P></P> <P>I just checked for CLI analyzer v3.1.0 and for file analysis you do not need to be connected to the device.</P> <P>Make sure you are giving one of the supported commands and&nbsp;attaching an image stating the same.</P> <P></P> <P>-</P> <P>Pulkit</P> <P></P> <P></P> Fri, 28 Oct 2016 02:17:21 GMT https://community.cisco.com/t5/network-security/cli-analyzer-output-interpreter/m-p/2996675#M148942 Pulkit Saxena 2016-10-28T02:17:21Z