topic hi, in Network Security

Image Boot Loop on an asa 5520

manuscript1 — Tue, 12 Mar 2019 08:25:02 GMT

I have done an attempted asa system image upgrade from CLI but have a problem with the old image getting loaded - cannot get the new image to stat after a further reload or reboot

I have copied the new .bin image to flash and can see it in flash/disk0: . I can edit the boot commands so that it points to the new image ....I can reboot to new image once and it seems to load ( I do get an upgrade error file which I havent got my hands on yet - long day !

here is some of my cli output that may help:

ciscoasa# sh ver

Cisco Adaptive Security Appliance Software Version 8.4(5) ( looks like my code is loaded 845 )
Device Manager Version 6.4(5)

Compiled on Mon 29-Oct-12 10:13 by builders
System image file is "disk0:/asa845-k8.bin"
Config file at boot was "startup-config"

ciscoasa up 6 mins 53 secs

output however shows no boot code configured

BOOT variable =
Current BOOT variable =
CONFIG_FILE variable =
Current CONFIG_FILE variable =

What happens if i reload is it reverts to the old code - The config prior to upgrade attempt did not have any entries in this boot settings (ie : no boot system {disk0:/ | disk1:/}[path/]asa_image_name) ) so nothing to remove prior to UG

ciscoasa#
36 15390720 Jan 18 2013 05:37:06 asa825-k8.bin
37 16280544 Jan 18 2013 07:40:02 asdm-645.bin
38 28672 Jan 01 1980 00:00:00 FSCK0000.REC
2 4096 Jan 01 2003 00:03:16 log
5 4096 Jan 01 2003 00:03:26 crypto_archive
11 4096 Jan 01 2003 00:03:30 coredumpinfo
12 59 Oct 18 2016 15:13:50 coredumpinfo/coredump.cfg
40 4096 Jan 01 1980 00:00:00 FSCK0001.REC
41 12998641 Jan 18 2013 07:36:10 csd_3.5.2008-k9.pkg
42 4096 Jan 18 2013 07:36:12 sdesktop
57 1462 Jan 18 2013 07:36:12 sdesktop/data.xml
43 6487517 Jan 18 2013 07:36:16 anyconnect-macosx-i386-2.5.2014-k9.pkg
44 6689498 Jan 18 2013 07:36:20 anyconnect-linux-2.5.2014-k9.pkg
45 4678691 Jan 18 2013 07:36:22 anyconnect-win-2.5.2014-k9.pkg
46 4096 May 20 2015 15:14:08 tmp
47 28672 Jan 01 1980 00:00:00 FSCK0002.REC
48 4096 Jan 01 1980 00:00:00 FSCK0003.REC
49 28672 Jan 01 1980 00:00:00 FSCK0004.REC
50 4096 Jan 01 1980 00:00:00 FSCK0005.REC
51 25196544 Oct 18 2016 14:55:50 asa845-k8.bin
52 15841428 Oct 18 2016 14:59:40 adsm-641.bin
53 100 Oct 18 2016 15:13:50 upgrade_startup_errors_201610181513.log
17 100 Oct 18 2016 15:42:24 upgrade_startup_errors_201610181542.log ( I will get this log and append when i get it )

Question is how do I force the new code ? I have no config to save as this is a lab environment - even if I put in boot command after a restart it losses the "boot system {disk0:/ asa845-k9.bin statement ...." after a further reload in teh boot variables

Must be missing something obvious ! any ideas !? help appreciated !

Hi,

Aditya Ganjoo — Wed, 19 Oct 2016 04:52:59 GMT

Hi,

Please ensure you save the memory (wr mem) after you change the boot variable.

Alos check the config register value ( you can see that in the show version) of the ASA.

It should be 0x01.

Regards,

Aditya

Please rate helpful posts and mark correct answers.

hi,

johnlloyd_13 — Wed, 19 Oct 2016 08:23:08 GMT

hi,

could you post the WHOLE output of show version and a fsck disk0:

I did teh boot loader chaneg

manuscript1 — Wed, 19 Oct 2016 12:25:23 GMT

I did teh boot loader chaneg and wr mem but i still seem to be looping around ...initially it seemed ok but after a coupel of reboots i was back in a loop .

here is more cli output - no matter how i set teh boot variable it seems to revert to earlier code - I have had it boot into 845 onec or twice but always seems to rvert back ?! also answers to johnlloyds query cli output

CISCO SYSTEMS
Embedded BIOS Version 1.0(11)5 08/28/08 15:11:51.82

Low Memory: 631 KB
High Memory: 2048 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 00 00 8086 2578 Host Bridge
00 01 00 8086 2579 PCI-to-PCI Bridge
00 03 00 8086 257B PCI-to-PCI Bridge
00 1C 00 8086 25AE PCI-to-PCI Bridge
00 1D 00 8086 25A9 Serial Bus 11
00 1D 01 8086 25AA Serial Bus 10
00 1D 04 8086 25AB System
00 1D 05 8086 25AC IRQ Controller
00 1D 07 8086 25AD Serial Bus 9
00 1E 00 8086 244E PCI-to-PCI Bridge
00 1F 00 8086 25A1 ISA Bridge
00 1F 02 8086 25A3 IDE Controller 11
00 1F 03 8086 25A4 Serial Bus 5
00 1F 05 8086 25A6 Audio 5
02 01 00 8086 1075 Ethernet 11
03 01 00 177D 0003 Encrypt/Decrypt 9
03 02 00 8086 1079 Ethernet 9
03 02 01 8086 1079 Ethernet 9
03 03 00 8086 1079 Ethernet 9
03 03 01 8086 1079 Ethernet 9
04 02 00 8086 1209 Ethernet 11
04 03 00 8086 1209 Ethernet 5

Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON

Cisco Systems ROMMON Version (1.0(11)5) #0: Thu Aug 28 15:23:50 PDT 2008

Platform ASA5520

Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.

Launching BootLoader...
Default configuration file contains 1 entry.

Searching / for images to boot.

Loading /asa825-k8.bin... Booting...
Platform ASA5520

Loading...
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
Starting check/repair pass.
Starting verification pass.
/dev/hda1: 168 files, 25698/63485 clusters
dosfsck(/dev/hda1) returned 0

Processor memory 1901936640, Reserved memory: 99614720 (DSOs: 0 + kernel: 99614720)

Total SSMs found: 1
SSM-4GE, SN JAD17250444, HW ver 1.0, FW ver 1.0(0)8

Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 150
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
SSL VPN Peers : 2
Total VPN Peers : 750
Shared License : Disabled
AnyConnect for Mobile : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials : Disabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions : 2
Total UC Proxy Sessions : 2
Botnet Traffic Filter : Disabled

This platform has an ASA 5520 VPN Plus license.

Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05

Cisco Adaptive Security Appliance Software Version 8.2(5)

****************************** Warning *******************************
This product contains cryptographic features and is
subject to United States and local country laws
governing, import, export, transfer, and use.
Delivery of Cisco cryptographic products does not
imply third-party authority to import, export,
distribute, or use encryption. Importers, exporters,
distributors and users are responsible for compliance
with U.S. and local country laws. By using this
product you agree to comply with applicable laws and
regulations. If you are unable to comply with U.S.
and local laws, return the enclosed items immediately.

A summary of U.S. laws governing Cisco cryptographic
products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by
sending email to export@cisco.com.
******************************* Warning *******************************

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Configuration Compatibility Warning:
The version 8.4(5)0 configuration may contain syntax that is
not backward compatible with the 8.2(5) image that is loaded.

*** Output from config line 4, "ASA Version 8.4(5) "

no arp permit-nonconnected
^
ERROR: % Invalid input detected at '^' marker.
*** Output from config line 74, "no arp permit-nonconnect..."

timeout pat-xlate 0:00:30
^
ERROR: % Invalid input detected at '^' marker.
*** Output from config line 76, "timeout pat-xlate 0:00:3..."

user-identity default-domain LOCAL
^
ERROR: % Invalid input detected at '^' marker.
*** Output from config line 84, "user-identity default-do..."

snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart ^

ERROR: % Invalid input detected at '^' marker.
*** Output from config line 87, "snmp-server enable traps..."

ssh key-exchange group dh-group1-sha1
^
ERROR: % Invalid Hostname
*** Output from config line 90, "ssh key-exchange group d..."
.
Cryptochecksum (unchanged): c42a6978 f9f838b7 f9de4163 3f7e874f
Type help or '?' for a list of available commands.
spare1> sh ver

Cisco Adaptive Security Appliance Software Version 8.2(5)
Device Manager Version 6.4(5)

Compiled on Fri 20-May-11 16:00 by builders
System image file is "disk0:/asa825-k8.bin"
Config file at boot was "startup-config"

spare1 up 20 mins 55 secs

Hardware: ASA5520, 2048 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024KB

0: Ext: GigabitEthernet0/0 : address is 6073.5c53.48d8, irq 9
1: Ext: GigabitEthernet0/1 : address is 6073.5c53.48d9, irq 9
2: Ext: GigabitEthernet0/2 : address is 6073.5c53.48da, irq 9
3: Ext: GigabitEthernet0/3 : address is 6073.5c53.48db, irq 9
4: Ext: Management0/0 : address is 6073.5c53.48dc, irq 11
5: Int: Internal-Data0/0 : address is 0000.0001.0002, irq 11
6: Int: Not used : irq 5
7: Ext: GigabitEthernet1/0 : address is b0fa.eb0b.7422, irq 255
8: Ext: GigabitEthernet1/1 : address is b0fa.eb0b.7423, irq 255
9: Ext: GigabitEthernet1/2 : address is b0fa.eb0b.7424, irq 255
10: Ext: GigabitEthernet1/3 : address is b0fa.eb0b.7425, irq 255
11: Int: Internal-Data1/0 : address is 0000.0003.0002, irq 255

This platform has an ASA 5520 VPN Plus license.

BOOT variable =
Current BOOT variable =
CONFIG_FILE variable =
Current CONFIG_FILE variable =
spare1# conf t
spare1(config)#

***************************** NOTICE *****************************

Help to improve the ASA platform by enabling anonymous reporting,
which allows Cisco to securely receive minimal error and health
information from the device. To learn more about this feature,
please visit: http://www.cisco.com/go/smartcall

Would you like to enable anonymous error reporting to help improve
the product? [Y]es, [N]o, [A]sk later: A
You will be reminded again in 7 days.

If you would like to enable this feature, issue the command
"call-home reporting anonymous".

Please remember to save your configuration.

spare1(config)# boot flash ?
ERROR: % Unrecognized command
spare1(config)# boot flash: ?
ERROR: % Unrecognized command
spare1(config)# system ?
ERROR: % Unrecognized command
spare1(config)# boot system ?

configure mode commands/options:
flash:/8_2_5_0_startup_cfg.sav flash:/FSCK0000.REC
flash:/FSCK0001.REC flash:/FSCK0002.REC
flash:/FSCK0003.REC flash:/FSCK0004.REC
flash:/FSCK0005.REC flash:/adsm-641.bin
flash:/anyconnect-linux-2.5.2014-k9.pkg
flash:/anyconnect-macosx-i386-2.5.2014-k9.pkg
flash:/anyconnect-win-2.5.2014-k9.pkg flash:/asa825-k8.bin
flash:/asa845-k8.bin flash:/asdm-645.bin
flash:/coredumpinfo flash:/crypto_archive
flash:/csd_3.5.2008-k9.pkg flash:/log
flash:/sdesktop flash:/tmp
flash:/upgrade_startup_errors_201610181513.log
flash:/upgrade_startup_errors_201610181542.log
flash:/upgrade_startup_errors_201610190924.log
flash:/upgrade_startup_errors_201610190933.log
flash:/upgrade_startup_errors_201610190937.log
spare1(config)# boot system flash:/asa845-k8.bin
INFO: Converting flash:/asa845-k8.bin to disk0:/asa845-k8.bin
spare1(config)# exit
spare1# wr mem
Building configuration...
Cryptochecksum: 72535d33 086f5a9a 905e9718 e3188300

2577 bytes copied in 3.410 secs (859 bytes/sec)
[OK]
spare1#
spare1# sh boot

BOOT variable = disk0:/asa845-k8.bin
Current BOOT variable = disk0:/asa845-k8.bin
CONFIG_FILE variable =
Current CONFIG_FILE variable =
spare1# wr mem
Building configuration...
Cryptochecksum: 72535d33 086f5a9a 905e9718 e3188300

2577 bytes copied in 3.360 secs (859 bytes/sec)
[OK]
spare1#
spare1# reload
Proceed with reload? [confirm]
spare1#

***
*** --- START GRACEFUL SHUTDOWN ---
Shutting down isakmp
Shutting down File system

***
*** --- SHUTDOWN NOW ---
Process shutdown finished
Rebooting.....

Booting system, please wait...

CISCO SYSTEMS
Embedded BIOS Version 1.0(11)5 08/28/08 15:11:51.82

Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON

Cisco Systems ROMMON Version (1.0(11)5) #0: Thu Aug 28 15:23:50 PDT 2008

Platform ASA5520

Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.

Launching BootLoader...
Boot configuration file contains 1 entry.

Loading disk0:/asa845-k8.bin... Booting...
Platform ASA5520

Loading...
IO memory blocks requested from bigphys 32bit: 20848
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
Starting check/repair pass.
Starting verification pass.
/dev/hda1: 168 files, 25698/63485 clusters
dosfsck(/dev/hda1) returned 0
Processor memory 1862270976, Reserved memory: 99614720

Total SSMs found: 1
SSM-4GE, SN JAD17250444, HW ver 1.0, FW ver 1.0(0)8

Total NICs found: 12
mcwa i82557 Ethernet at irq 11 MAC: 6073.5c53.48dc
mcwa i82557 Ethernet at irq 5 MAC: 0000.0001.0001
i82547GI rev00 Gigabit Ethernet @ irq11 dev 1 index 05 MAC: 0000.0001.0002
i82546GB rev03 Gigabit Ethernet @ irq09 dev 2 index 03 MAC: 6073.5c53.48db
i82546GB rev03 Gigabit Ethernet @ irq09 dev 2 index 02 MAC: 6073.5c53.48da
i82546GB rev03 Gigabit Ethernet @ irq09 dev 3 index 01 MAC: 6073.5c53.48d9
i82546GB rev03 Gigabit Ethernet @ irq09 dev 3 index 00 MAC: 6073.5c53.48d8
VCS7380 Gigabit Ethernet @ index 07 MAC: b0fa.eb0b.7422
VCS7380 Gigabit Ethernet @ index 08 MAC: b0fa.eb0b.7423
VCS7380 Gigabit Ethernet @ index 09 MAC: b0fa.eb0b.7424
VCS7380 Gigabit Ethernet @ index 10 MAC: b0fa.eb0b.7425
VCS7380 Gigabit Ethernet @ index 11 MAC: 0000.0003.0002
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.06
Verify the activation-key, it might take a while...
Running Permanent Activation Key: 0x9223c463 0x9487aee0 0xa0a2c1f0 0x9e4464b0 0x4c12378d

Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 150 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled perpetual
Security Contexts : 2 perpetual
GTP/GPRS : Disabled perpetual
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 750 perpetual
Total VPN Peers : 750 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual

This platform has an ASA 5520 VPN Plus license.

Cisco Adaptive Security Appliance Software Version 8.4(5)

A summary of U.S. laws governing Cisco cryptographic
products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by
sending email to export@cisco.com.
******************************* Warning *******************************

Restricted Rights Legend

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Reading from flash...
!
REAL IP MIGRATION: WARNING
In this version access-lists used in 'access-group', 'class-map',
'dynamic-filter classify-list', 'aaa match' will be migrated from
using IP address/ports as seen on interface, to their real values.
If an access-list used by these features is shared with per-user ACL
then the original access-list has to be recreated.
INFO: Note that identical IP addresses or overlapping IP ranges on
different interfaces are not detectable by automated Real IP migration.
If your deployment contains such scenarios, please verify your migrated
configuration is appropriate for those overlapping addresses/ranges.
Please also refer to the ASA 8.3 migration guide for a complete
explanation of the automated migration process.

INFO: MIGRATION - Saving the startup configuration to file

INFO: MIGRATION - Startup configuration saved to file 'flash:8_2_5_0_startup_cfg.sav'
*** Output from config line 4, "ASA Version 8.2(5) "
.
Cryptochecksum (unchanged): 72535d33 086f5a9a 905e9718 e3188300
Real IP migration logs:
No ACL was changed as part of Real-ip migration

INFO: MIGRATION - Saving the startup errors to file 'flash:upgrade_startup_errors_201610191038.log'
Type help or '?' for a list of available commands.
spare1> en
Password:
spare1# reload
Proceed with reload? [confirm]
spare1#

***
*** --- START GRACEFUL SHUTDOWN ---
Shutting down isakmp
Shutting down File system

***
*** --- SHUTDOWN NOW ---
Process shutdown finished
Rebooting.....

Booting system, please wait...

CISCO SYSTEMS
Embedded BIOS Version 1.0(11)5 08/28/08 15:11:51.82

Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON

Cisco Systems ROMMON Version (1.0(11)5) #0: Thu Aug 28 15:23:50 PDT 2008

Platform ASA5520

Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.

Launching BootLoader...
Boot configuration file contains 1 entry.

Loading disk0:/asa845-k8.bin... Booting...
Platform ASA5520

Loading...
IO memory blocks requested from bigphys 32bit: 20848
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
Starting check/repair pass.
Starting verification pass.
/dev/hda1: 170 files, 25699/63485 clusters
dosfsck(/dev/hda1) returned 0
Processor memory 1862270976, Reserved memory: 99614720

Total SSMs found: 1
SSM-4GE, SN JAD17250444, HW ver 1.0, FW ver 1.0(0)8

This platform has an ASA 5520 VPN Plus license.

Cisco Adaptive Security Appliance Software Version 8.4(5)

A summary of U.S. laws governing Cisco cryptographic
products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by
sending email to export@cisco.com.
******************************* Warning *******************************

Restricted Rights Legend

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

INFO: MIGRATION - Saving the startup configuration to file

INFO: MIGRATION - Saving the startup errors to file 'flash:upgrade_startup_errors_201610191042.log'
Type help or '?' for a list of available commands.
spare1> more flash ?
ERROR: % Unrecognized command
spare1> en
Password:
spare1# more ?

/ascii Display binary files in ASCII
/binary Force display to hex/text format
/ebcdic Display binary files in EBCDIC
disk0: File to display
disk1: File to display
flash: File to display
ftp: File to display
http: File to display
https: File to display
smb: File to display
system: File to display
tftp: File to display
spare1# more flash:flash:upgrade_startup_errors_201610191042.log

%Error opening disk0:/flash:upgrade_startup_errors_201610191042.log (No such file or directory)
spare1# more flash:flash:/upgrade_startup_errors_201610191042.log

%Error opening disk0:/flash:/upgrade_startup_errors_201610191042.log (No such file or directory)
spare1# sh flash:
--#-- --length-- -----date/time------ path
155 15390720 Jan 18 2013 05:37:06 asa825-k8.bin
156 16280544 Jan 18 2013 07:40:02 asdm-645.bin
157 28672 Jan 01 1980 00:00:00 FSCK0000.REC
2 4096 Jan 01 2003 00:03:16 log
5 4096 Jan 01 2003 00:03:26 crypto_archive
11 4096 Jan 01 2003 00:03:30 coredumpinfo
12 59 Oct 18 2016 15:13:50 coredumpinfo/coredump.cfg
159 4096 Jan 01 1980 00:00:00 FSCK0001.REC
160 12998641 Jan 18 2013 07:36:10 csd_3.5.2008-k9.pkg
161 4096 Jan 18 2013 07:36:12 sdesktop
181 1462 Jan 18 2013 07:36:12 sdesktop/data.xml
162 6487517 Jan 18 2013 07:36:16 anyconnect-macosx-i386-2.5.2014-k9.pkg
163 6689498 Jan 18 2013 07:36:20 anyconnect-linux-2.5.2014-k9.pkg
164 4678691 Jan 18 2013 07:36:22 anyconnect-win-2.5.2014-k9.pkg
165 4096 May 20 2015 15:14:08 tmp
166 28672 Jan 01 1980 00:00:00 FSCK0002.REC
167 4096 Jan 01 1980 00:00:00 FSCK0003.REC
168 28672 Jan 01 1980 00:00:00 FSCK0004.REC
169 4096 Jan 01 1980 00:00:00 FSCK0005.REC
170 25196544 Oct 18 2016 14:55:50 asa845-k8.bin
171 15841428 Oct 18 2016 14:59:40 adsm-641.bin
172 100 Oct 18 2016 15:13:50 upgrade_startup_errors_201610181513.log
173 100 Oct 18 2016 15:42:24 upgrade_startup_errors_201610181542.log
174 100 Oct 19 2016 09:24:22 upgrade_startup_errors_201610190924.log
131 2577 Oct 19 2016 10:42:09 8_2_5_0_startup_cfg.sav
175 1138 Oct 19 2016 09:33:22 upgrade_startup_errors_201610190933.log
176 200 Oct 19 2016 09:37:14 upgrade_startup_errors_201610190937.log
177 1138 Oct 19 2016 10:38:42 upgrade_startup_errors_201610191038.log
180 1138 Oct 19 2016 10:42:10 upgrade_startup_errors_201610191042.log

260034560 bytes total (154767360 bytes free)
spare1#
spare1#
spare1# more flash:upgrade_startup_errors_201610191042.log
INFO: MIGRATION - Saving the startup errors to file 'flash:upgrade_startup_errors_201610191042.log'
Reading from flash...
!
REAL IP MIGRATION: WARNING
In this version access-lists used in 'access-group', 'class-map',
'dynamic-filter classify-list', 'aaa match' will be migrated from
using IP address/ports as seen on interface, to their real values.
If an access-list used by these features is shared with per-user ACL
then the original access-list has to be recreated.
INFO: Note that identical IP addresses or overlapping IP ranges on
different interfaces are not detectable by automated Real IP migration.
If your deployment contains such scenarios, please verify your migrated
configuration is appropriate for those overlapping addresses/ranges.
Please also refer to the ASA 8.3 migration guide for a complete
explanation of the automated migration process.

INFO: MIGRATION - Saving the startup configuration to file

INFO: MIGRATION - Startup configuration saved to file 'flash:8_2_5_0_startup_cfg.sav'
*** Output from config line 4, "ASA Version 8.2(5) "
Real IP migration logs:
No ACL was changed as part of Real-ip migration

spare1#
spare1#
spare1# sh conf
: Saved
: Written by enable_15 at 10:35:44.059 UTC Wed Oct 19 2016
!
ASA Version 8.2(5)
!
hostname spare1
domain-name bradford.gov.uk
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface GigabitEthernet0/0
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/1
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
nameif management
security-level 0
ip address 10.160.34.20 255.255.254.0
!
interface GigabitEthernet1/0
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/1
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/2
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/3
shutdown
no nameif
no security-level
no ip address
!
boot system disk0:/asa845-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name bradford.gov.uk
pager lines 24
mtu management 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
no snmp-server location
no snmp-server contact
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
!
!
prompt hostname context
call-home reporting anonymous prompt 2
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email callhome@cisco.com
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:72535d33086f5a9a905e9718e3188300
spare1# wr erase
Erase configuration in flash memory? [confirm]
[OK]
spare1#
spare1#
spare1#
spare1#
spare1#
spare1# reload
Proceed with reload? [confirm]
spare1#

***
*** --- START GRACEFUL SHUTDOWN ---
Shutting down isakmp
Shutting down File system

***
*** --- SHUTDOWN NOW ---
Process shutdown finished
Rebooting.....

Booting system, please wait...

CISCO SYSTEMS
Embedded BIOS Version 1.0(11)5 08/28/08 15:11:51.82

Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON

Cisco Systems ROMMON Version (1.0(11)5) #0: Thu Aug 28 15:23:50 PDT 2008

Platform ASA5520

Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.

Launching BootLoader...
Boot configuration file contains 1 entry.

Loading disk0:/asa845-k8.bin... Booting...
Platform ASA5520

Loading...
IO memory blocks requested from bigphys 32bit: 20848
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
Starting check/repair pass.
Starting verification pass.
/dev/hda1: 172 files, 25699/63485 clusters
dosfsck(/dev/hda1) returned 0
Processor memory 1862270976, Reserved memory: 99614720

Total SSMs found: 1
SSM-4GE, SN JAD17250444, HW ver 1.0, FW ver 1.0(0)8

This platform has an ASA 5520 VPN Plus license.

Cisco Adaptive Security Appliance Software Version 8.4(5)

A summary of U.S. laws governing Cisco cryptographic
products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by
sending email to export@cisco.com.
******************************* Warning *******************************

Restricted Rights Legend

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Reading from flash...
Flash read failed
ERROR: MIGRATION - Could not get the startup configuration.

Cryptochecksum (changed): d41d8cd9 8f00b204 e9800998 ecf8427e

INFO: MIGRATION - Saving the startup errors to file 'flash:upgrade_startup_errors_201610191052.log'
Pre-configure Firewall now through interactive prompts [yes]?

Type help or '?' for a list of available commands.
ciscoasa>
ciscoasa>
ciscoasa>
ciscoasa>
ciscoasa> en
Password:
ciscoasa# conf t
ciscoasa(config)#

***************************** NOTICE *****************************

Would you like to enable anonymous error reporting to help improve
the product? [Y]es, [N]o, [A]sk later: Y

Enabling anonymous reporting.
Adding "call-home reporting anonymous" to running configuration...
Creating trustpoint "_SmartCallHome_ServerCA" and installing certificate...

Trustpoint '_SmartCallHome_ServerCA' is a subordinate CA and holds a non self-signed certificate.

Trustpoint CA certificate accepted.

Please remember to save your configuration.

ciscoasa(config)# hostname CiscoASA
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)# exit
CiscoASA# sh runn
: Saved
:
ASA Version 8.4(5)
!
hostname CiscoASA
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface GigabitEthernet0/0
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/1
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/0
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/1
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/2
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/3
shutdown
no nameif
no security-level
no ip address
!
ftp mode passive
pager lines 24
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130
0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117
30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504
0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56
65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420
68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329
3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365
63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7
0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201
db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101
ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8
45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a
1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969
6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603
551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355
1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609
2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
!
service-policy global_policy global
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email callhome@cisco.com
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:6b4609d812b83e71c6dcf80a46b5debc
: end
CiscoASA# copy run start

Source filename [running-config]?
Cryptochecksum: 6b4609d8 12b83e71 c6dcf80a 46b5debc

6953 bytes copied in 3.770 secs (2317 bytes/sec)
CiscoASA# sh runn
: Saved
:
ASA Version 8.4(5)
!
hostname CiscoASA
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface GigabitEthernet0/0
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/1
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/0
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/1
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/2
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/3
shutdown
no nameif
no security-level
no ip address
!
ftp mode passive
pager lines 24
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130
0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117
30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504
0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56
65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420
68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329
3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365
63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7
0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201
db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101
ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8
45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a
1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969
6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603
551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355
1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609
2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
!
service-policy global_policy global
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email callhome@cisco.com
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:6b4609d812b83e71c6dcf80a46b5debc
: end
CiscoASA#
CiscoASA#
CiscoASA# reload
Proceed with reload? [confirm]
CiscoASA#

***
*** --- START GRACEFUL SHUTDOWN ---
Shutting down isakmp
Shutting down File system

***
*** --- SHUTDOWN NOW ---
Process shutdown finished
Rebooting.....

Booting system, please wait...

CISCO SYSTEMS
Embedded BIOS Version 1.0(11)5 08/28/08 15:11:51.82

Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON

Cisco Systems ROMMON Version (1.0(11)5) #0: Thu Aug 28 15:23:50 PDT 2008

Platform ASA5520

Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.

Launching BootLoader...
Default configuration file contains 1 entry.

Searching / for images to boot.

Loading /asa825-k8.bin... Booting...
Platform ASA5520

Loading...
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
Starting check/repair pass.
Starting verification pass.
/dev/hda1: 174 files, 25702/63485 clusters
dosfsck(/dev/hda1) returned 0

Processor memory 1901969408, Reserved memory: 99614720 (DSOs: 0 + kernel: 99614720)

Total SSMs found: 1
SSM-4GE, SN JAD17250444, HW ver 1.0, FW ver 1.0(0)8

This platform has an ASA 5520 VPN Plus license.

Cisco Adaptive Security Appliance Software Version 8.2(5)

A summary of U.S. laws governing Cisco cryptographic
products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by
sending email to export@cisco.com.
******************************* Warning *******************************

Restricted Rights Legend

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Configuration Compatibility Warning:
The version 8.4(5)0 configuration may contain syntax that is
not backward compatible with the 8.2(5) image that is loaded.

*** Output from config line 5, "ASA Version 8.4(5) "

no arp permit-nonconnected
^
ERROR: % Invalid input detected at '^' marker.
*** Output from config line 72, "no arp permit-nonconnect..."

timeout pat-xlate 0:00:30
^
ERROR: % Invalid input detected at '^' marker.
*** Output from config line 74, "timeout pat-xlate 0:00:3..."

user-identity default-domain LOCAL
^
ERROR: % Invalid input detected at '^' marker.
*** Output from config line 82, "user-identity default-do..."

snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart ^

ERROR: % Invalid input detected at '^' marker.
*** Output from config line 85, "snmp-server enable traps..."
..
ssh key-exchange group dh-group1-sha1
^
ERROR: % Invalid Hostname
*** Output from config line 141, "ssh key-exchange group d..."
.
Cryptochecksum (unchanged): 6b4609d8 12b83e71 c6dcf80a 46b5debc
Type help or '?' for a list of available commands.
CiscoASA> sh ver

Cisco Adaptive Security Appliance Software Version 8.2(5)
Device Manager Version 6.4(5)

Compiled on Fri 20-May-11 16:00 by builders
System image file is "disk0:/asa825-k8.bin"
Config file at boot was "startup-config"

CiscoASA up 27 secs

Hardware: ASA5520, 2048 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024KB

This platform has an ASA 5520 VPN Plus license.

BOOT variable =
Current BOOT variable =
CONFIG_FILE variable =
Current CONFIG_FILE variable =
CiscoASA# sh boot

BOOT variable =
Current BOOT variable =
CONFIG_FILE variable =
Current CONFIG_FILE variable =
CiscoASA# sh ver

Cisco Adaptive Security Appliance Software Version 8.2(5)
Device Manager Version 6.4(5)

Compiled on Fri 20-May-11 16:00 by builders
System image file is "disk0:/asa825-k8.bin"
Config file at boot was "startup-config"

CiscoASA up 2 mins 26 secs

Hardware: ASA5520, 2048 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024KB

This platform has an ASA 5520 VPN Plus license.

/noconfirm Do not prompt for confirmation
disk0: Filesystem to be checked
disk1: Filesystem to be checked
flash: Filesystem to be checked
CiscoASA# fsck disk0
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
/dev/hda1: 87 files, 25702/63485 clusters

fsck of disk0: complete
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA#
CiscoASA# SH BOOT

BOOT variable =
Current BOOT variable =
CONFIG_FILE variable =
Current CONFIG_FILE variable =
CiscoASA#
CiscoASA# conf t
CiscoASA(config)# system boot flash:?
ERROR: % Unrecognized command
CiscoASA(config)# system boot ?
ERROR: % Unrecognized command
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)#
CiscoASA(config)# sh boot

BOOT variable =
Current BOOT variable =
CONFIG_FILE variable =
Current CONFIG_FILE variable =
CiscoASA(config)# boot system ?

configure mode commands/options:
flash:/8_2_5_0_startup_cfg.sav flash:/FSCK0000.REC
flash:/FSCK0001.REC flash:/FSCK0002.REC
flash:/FSCK0003.REC flash:/FSCK0004.REC
flash:/FSCK0005.REC flash:/adsm-641.bin
flash:/anyconnect-linux-2.5.2014-k9.pkg
flash:/anyconnect-macosx-i386-2.5.2014-k9.pkg
flash:/anyconnect-win-2.5.2014-k9.pkg flash:/asa825-k8.bin
flash:/asa845-k8.bin flash:/asdm-645.bin
flash:/coredumpinfo flash:/crypto_archive
flash:/csd_3.5.2008-k9.pkg flash:/log
flash:/sdesktop flash:/tmp
flash:/upgrade_startup_errors_201610181513.log
flash:/upgrade_startup_errors_201610181542.log
flash:/upgrade_startup_errors_201610190924.log
flash:/upgrade_startup_errors_201610190933.log
flash:/upgrade_startup_errors_201610190937.log
flash:/upgrade_startup_errors_201610191038.log
flash:/upgrade_startup_errors_201610191042.log
flash:/upgrade_startup_errors_201610191052.log
CiscoASA(config)# boot system flash:asa825-k8.bin
INFO: Converting flash:asa825-k8.bin to disk0:/asa825-k8.bin
CiscoASA(config)# sh boot

BOOT variable =
Current BOOT variable = disk0:/asa825-k8.bin
CONFIG_FILE variable =
Current CONFIG_FILE variable =
CiscoASA(config)# wr mem
Building configuration...
Cryptochecksum: 0c4b1264 8417f366 a33365bf d6a5142c

6897 bytes copied in 3.480 secs (2299 bytes/sec)
[OK]
CiscoASA(config)#
CiscoASA(config)# exit
CiscoASA# sh boot

BOOT variable = disk0:/asa825-k8.bin
Current BOOT variable = disk0:/asa825-k8.bin
CONFIG_FILE variable =
Current CONFIG_FILE variable =
CiscoASA# reload
Proceed with reload? [confirm]
CiscoASA#

***
*** --- START GRACEFUL SHUTDOWN ---
Shutting down isakmp
Shutting down File system

***
*** --- SHUTDOWN NOW ---
Process shutdown finished
Rebooting.....

Booting system, please wait...

CISCO SYSTEMS
Embedded BIOS Version 1.0(11)5 08/28/08 15:11:51.82

Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON

Cisco Systems ROMMON Version (1.0(11)5) #0: Thu Aug 28 15:23:50 PDT 2008

Platform ASA5520

Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.

Launching BootLoader...
Boot configuration file contains 1 entry.

Loading disk0:/asa825-k8.bin... Booting...
Platform ASA5520

Loading...
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
Starting check/repair pass.
Starting verification pass.
/dev/hda1: 174 files, 25702/63485 clusters
dosfsck(/dev/hda1) returned 0

Processor memory 1901969408, Reserved memory: 99614720 (DSOs: 0 + kernel: 99614720)

Total SSMs found: 1
SSM-4GE, SN JAD17250444, HW ver 1.0, FW ver 1.0(0)8

This platform has an ASA 5520 VPN Plus license.

Cisco Adaptive Security Appliance Software Version 8.2(5)

A summary of U.S. laws governing Cisco cryptographic
products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by
sending email to export@cisco.com.
******************************* Warning *******************************

Restricted Rights Legend

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

...
Cryptochecksum (unchanged): 0c4b1264 8417f366 a33365bf d6a5142c
Type help or '?' for a list of available commands.
CiscoASA> sh ver sh boot
^
ERROR: % Invalid input detected at '^' marker.
CiscoASA> sh boot
^
ERROR: % Invalid input detected at '^' marker.
CiscoASA> en
Password:
CiscoASA# sh boot

BOOT variable = disk0:/asa825-k8.bin
Current BOOT variable = disk0:/asa825-k8.bin
CONFIG_FILE variable =
Current CONFIG_FILE variable =
CiscoASA# sh ver

Cisco Adaptive Security Appliance Software Version 8.2(5)
Device Manager Version 6.4(5)

Compiled on Fri 20-May-11 16:00 by builders
System image file is "disk0:/asa825-k8.bin"
Config file at boot was "startup-config"

CiscoASA up 53 secs

Hardware: ASA5520, 2048 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024KB

This platform has an ASA 5520 VPN Plus license.

Serial Number: JMX170380WM
Running Activation Key: 0x9223c463 0x9487aee0 0xa0a2c1f0 0x9e4464b0 0x4c12378d
Configuration register is 0x1
Configuration has not been modified since last system restart.
CiscoASA# sh flash:
--#-- --length-- -----date/time------ path
158 15390720 Jan 18 2013 05:37:06 asa825-k8.bin
159 16280544 Jan 18 2013 07:40:02 asdm-645.bin
160 28672 Jan 01 1980 00:00:00 FSCK0000.REC
3 4096 Jan 01 2003 00:03:16 log
10 4096 Jan 01 2003 00:03:26 crypto_archive
11 4096 Jan 01 2003 00:03:30 coredumpinfo
12 59 Oct 18 2016 15:13:50 coredumpinfo/coredump.cfg
162 4096 Jan 01 1980 00:00:00 FSCK0001.REC
163 12998641 Jan 18 2013 07:36:10 csd_3.5.2008-k9.pkg
164 4096 Jan 18 2013 07:36:12 sdesktop
187 1462 Jan 18 2013 07:36:12 sdesktop/data.xml
165 6487517 Jan 18 2013 07:36:16 anyconnect-macosx-i386-2.5.2014-k9.pkg
166 6689498 Jan 18 2013 07:36:20 anyconnect-linux-2.5.2014-k9.pkg
167 4678691 Jan 18 2013 07:36:22 anyconnect-win-2.5.2014-k9.pkg
168 4096 May 20 2015 15:14:08 tmp
169 28672 Jan 01 1980 00:00:00 FSCK0002.REC
170 4096 Jan 01 1980 00:00:00 FSCK0003.REC
171 28672 Jan 01 1980 00:00:00 FSCK0004.REC
172 4096 Jan 01 1980 00:00:00 FSCK0005.REC
173 25196544 Oct 18 2016 14:55:50 asa845-k8.bin
174 15841428 Oct 18 2016 14:59:40 adsm-641.bin
175 100 Oct 18 2016 15:13:50 upgrade_startup_errors_201610181513.log
176 100 Oct 18 2016 15:42:24 upgrade_startup_errors_201610181542.log
177 100 Oct 19 2016 09:24:22 upgrade_startup_errors_201610190924.log
178 2577 Oct 19 2016 10:42:08 8_2_5_0_startup_cfg.sav
179 1138 Oct 19 2016 09:33:22 upgrade_startup_errors_201610190933.log
180 200 Oct 19 2016 09:37:14 upgrade_startup_errors_201610190937.log
181 1138 Oct 19 2016 10:38:42 upgrade_startup_errors_201610191038.log
182 1138 Oct 19 2016 10:42:10 upgrade_startup_errors_201610191042.log
183 200 Oct 19 2016 10:52:36 upgrade_startup_errors_201610191052.log

260034560 bytes total (154759168 bytes free)
CiscoASA# conf t
CiscoASA(config)# system boot ?
ERROR: % Unrecognized command
CiscoASA(config)# boot system ?

configure mode commands/options:
disk0: Path and filename on disk0:
disk1: Path and filename on disk1:
flash: Path and filename on flash:
tftp: A URL beginning with this prefix.
CiscoASA(config)# boot system flash:asa845-k8.bin
INFO: Converting flash:asa845-k8.bin to disk0:/asa845-k8.bin
CiscoASA(config)# sh boot

BOOT variable = disk0:/asa825-k8.bin
Current BOOT variable = disk0:/asa825-k8.bin;disk0:/asa845-k8.bin
CONFIG_FILE variable =
Current CONFIG_FILE variable =
CiscoASA(config)# wr mem
Building configuration...
Cryptochecksum: f571a60b 053b0cda ba8f7ecd df7ec11a

6930 bytes copied in 3.930 secs (2310 bytes/sec)
[OK]
CiscoASA(config)# reload
Proceed with reload? [confirm]
CiscoASA(config)#

***
*** --- START GRACEFUL SHUTDOWN ---
Shutting down isakmp
Shutting down File system

***
*** --- SHUTDOWN NOW ---
Process shutdown finished
Rebooting.....

Booting system, please wait...

CISCO SYSTEMS
Embedded BIOS Version 1.0(11)5 08/28/08 15:11:51.82

Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON

Cisco Systems ROMMON Version (1.0(11)5) #0: Thu Aug 28 15:23:50 PDT 2008

Platform ASA5520

Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.

Launching BootLoader...
Boot configuration file contains 2 entries.

Loading disk0:/asa825-k8.bin... Booting...
Platform ASA5520

Loading...
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
Starting check/repair pass.
Starting verification pass.
/dev/hda1: 174 files, 25702/63485 clusters
dosfsck(/dev/hda1) returned 0

Processor memory 1901969408, Reserved memory: 99614720 (DSOs: 0 + kernel: 99614720)

Total SSMs found: 1
SSM-4GE, SN JAD17250444, HW ver 1.0, FW ver 1.0(0)8

This platform has an ASA 5520 VPN Plus license.

Cisco Adaptive Security Appliance Software Version 8.2(5)

A summary of U.S. laws governing Cisco cryptographic
products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by
sending email to export@cisco.com.
******************************* Warning *******************************

Restricted Rights Legend

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

...
Cryptochecksum (unchanged): f571a60b 053b0cda ba8f7ecd df7ec11a
Type help or '?' for a list of available commands.
CiscoASA> sh ver

Cisco Adaptive Security Appliance Software Version 8.2(5)
Device Manager Version 6.4(5)

Compiled on Fri 20-May-11 16:00 by builders
System image file is "disk0:/asa825-k8.bin"
Config file at boot was "startup-config"

CiscoASA up 28 secs

Hardware: ASA5520, 2048 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024KB

This platform has an ASA 5520 VPN Plus license.

Serial Number: JMX170380WM
Running Activation Key: 0x9223c463 0x9487aee0 0xa0a2c1f0 0x9e4464b0 0x4c12378d
Configuration register is 0x1
Configuration has not been modified since last system restart.
CiscoASA> sh boot
^
ERROR: % Invalid input detected at '^' marker.
CiscoASA> en
Password: *******
Invalid password
Password:
CiscoASA# sh boot

BOOT variable = disk0:/asa825-k8.bin;disk0:/asa845-k8.bin
Current BOOT variable = disk0:/asa825-k8.bin;disk0:/asa845-k8.bin
CONFIG_FILE variable =
Current CONFIG_FILE variable =
CiscoASA#

Some more cli output as requested by Johnllloyd

CiscoASA> en
Password:
CiscoASA# sh boot

BOOT variable =
Current BOOT variable =
CONFIG_FILE variable =
Current CONFIG_FILE variable =
CiscoASA# sh boot

BOOT variable =
Current BOOT variable =
CONFIG_FILE variable =
Current CONFIG_FILE variable =
CiscoASA# sh ver

Cisco Adaptive Security Appliance Software Version 8.2(5)
Device Manager Version 6.4(5)

Compiled on Fri 20-May-11 16:00 by builders
System image file is "disk0:/asa825-k8.bin"
Config file at boot was "startup-config"

CiscoASA up 2 mins 26 secs

Hardware: ASA5520, 2048 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024KB

This platform has an ASA 5520 VPN Plus license.

Serial Number:
Running Activation Key: 0x9223c463 0x9487aee0 0xa0a2c1f0 0x9e4464b0 0x4c12378d
Configuration register is 0x1
Configuration has not been modified since last system restart.
CiscoASA# fsck disk:0
^

fsck of disk0: complete
CiscoASA#

hi,

johnlloyd_13 — Wed, 19 Oct 2016 14:45:57 GMT

hi,

your config-register 0x1 is fine but there seem some issue with your ASA's flash (disk0).

disk0: Filesystem to be checked

use the fomat disk0: global command to reformat your ASA flash and backup license key (if any) using show version and show activation-key commands.

http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/113266-asa-flash-error-ts.html#formatflash

I have got to teh bottom of

manuscript1 — Wed, 19 Oct 2016 14:58:33 GMT

I have got to teh bottom of thsi - for reference

the command " "no boot system disk0:/"image name" works whilst the command "boot system {disk0:/ asa845-k9.bin statement ." alone does not remove teh old one

Reafrsd and thanks all