https://community.cisco.com/t5/network-security/acl-hitcnt/m-p/2946698#M149195 <P>Hi all,</P> <P></P> <P>am I correct by saying the following?</P> <P></P> <P>an ACL will show hitcnt=&gt;0 when matching traffic that is flowing through the firewall (and <STRONG>will</STRONG> display on ASDM Real-Time Log Viewer)</P> <P>an ACL will show hitcnt=0 when matching traffic that is being sent to an IP on an interface on the firewall (will <STRONG>not</STRONG> display on ASDM <SPAN>Real-Time Log Viewer</SPAN>)</P> <P>an ACL will show hitcnt=0 when ACL is used for NAT&nbsp;<SPAN>(will </SPAN><STRONG>not</STRONG><SPAN> display on ASDM Real-Time Log Viewer)</SPAN></P> <P>an ACL will show hitcnt=0 when ACL allows a host which has been NAT'd&nbsp;<SPAN>(will </SPAN><STRONG>not</STRONG><SPAN> display on ASDM Real-Time Log Viewer)</SPAN></P> <P></P> <P>many thanks</P> <P>Dave</P> Tue, 12 Mar 2019 08:24:22 GMT d.hodgson 2019-03-12T08:24:22Z https://community.cisco.com/t5/network-security/acl-hitcnt/m-p/2946698#M149195 <P>Hi all,</P> <P></P> <P>am I correct by saying the following?</P> <P></P> <P>an ACL will show hitcnt=&gt;0 when matching traffic that is flowing through the firewall (and <STRONG>will</STRONG> display on ASDM Real-Time Log Viewer)</P> <P>an ACL will show hitcnt=0 when matching traffic that is being sent to an IP on an interface on the firewall (will <STRONG>not</STRONG> display on ASDM <SPAN>Real-Time Log Viewer</SPAN>)</P> <P>an ACL will show hitcnt=0 when ACL is used for NAT&nbsp;<SPAN>(will </SPAN><STRONG>not</STRONG><SPAN> display on ASDM Real-Time Log Viewer)</SPAN></P> <P>an ACL will show hitcnt=0 when ACL allows a host which has been NAT'd&nbsp;<SPAN>(will </SPAN><STRONG>not</STRONG><SPAN> display on ASDM Real-Time Log Viewer)</SPAN></P> <P></P> <P>many thanks</P> <P>Dave</P> Tue, 12 Mar 2019 08:24:22 GMT https://community.cisco.com/t5/network-security/acl-hitcnt/m-p/2946698#M149195 d.hodgson 2019-03-12T08:24:22Z