https://community.cisco.com/t5/network-security/configuration-of-pix-501/m-p/2960896#M149540 <P>I have changed internet provider and I need to change the config on my Cisco Pix 501.</P> <P>I have tried using the console cable (connected to Console port in PIX 501 and connected to network port (I do not have a serial port) thru COM PORT3 on my PC) together with Tera Term and also PUTTY.</P> <P>In both applications I get a blank black screen after i connect.</P> <P>Is there anything else I could try?</P> <P></P> <P></P> <P></P> <P></P> <P></P> Tue, 12 Mar 2019 08:20:53 GMT Pat Casey 2019-03-12T08:20:53Z https://community.cisco.com/t5/network-security/configuration-of-pix-501/m-p/2960896#M149540 <P>I have changed internet provider and I need to change the config on my Cisco Pix 501.</P> <P>I have tried using the console cable (connected to Console port in PIX 501 and connected to network port (I do not have a serial port) thru COM PORT3 on my PC) together with Tera Term and also PUTTY.</P> <P>In both applications I get a blank black screen after i connect.</P> <P>Is there anything else I could try?</P> <P></P> <P></P> <P></P> <P></P> <P></P> Tue, 12 Mar 2019 08:20:53 GMT https://community.cisco.com/t5/network-security/configuration-of-pix-501/m-p/2960896#M149540 Pat Casey 2019-03-12T08:20:53Z https://community.cisco.com/t5/network-security/configuration-of-pix-501/m-p/2960897#M149542 <P>You need to get a USB-serial adapter cable.</P> <P>I've used the same Trendnet one for years. $10.99 on Amazon and it's not let me down.</P> <P>https://www.amazon.com/TRENDnet-TU-S9-USB-Serial-Converter/dp/B0007T27H8/ref=sr_1_fkmr1_4?s=electronics&amp;ie=UTF8&amp;qid=1475503481&amp;sr=1-4-fkmr1&amp;th=1</P> Mon, 03 Oct 2016 14:07:30 GMT https://community.cisco.com/t5/network-security/configuration-of-pix-501/m-p/2960897#M149542 Marvin Rhoads 2016-10-03T14:07:30Z