topic Those are the correct images. in Network Security

POV with ASA FirePOWER: error loading FirePOWER service image

luca.lacchini — Tue, 12 Mar 2019 08:19:01 GMT

Hi,

I'm doing a POV with an ASA5506-k9. I loaded the boot image and did the recover process to load the FirePOWER service. When I try to do the system install of the pkg, I get an error:

"Package extraction failed. This problem usually indicates that a package is corrupted or that it is incompatible with this system. Please verify that the package is a valid upgrade for the software version running on this system.
Upgrade aborted."

I'm using an image get from Cisco suppport "asasfr-sys-5.4.1-211.pkg" and the boot is "asasfr-5500x-boot-5.4.1-211.img".

Anyone had this problem or can help me?

Thank you.

Those are the correct images.

Marvin Rhoads — Thu, 06 Oct 2016 11:46:53 GMT

Those are the correct images.

Have you checked the MD5 checksum of your download? For the pkg file, it should be "161bf0c6b5339a7b79c0163d5a73c77c" as noted on the download page.

Make sure that your ASA

Oliver Kaiser — Sun, 09 Oct 2016 17:27:36 GMT

Make sure that your ASA version is compatibel with SFR 5.4.1

The following ASA versions are compatible with your SFR version:

9.3(2) and later (ASA5506-X only)

9.4(1) and later

9.5(1.5) and later

9.6(1) and later

For more information check the Compatibility Guide

I asked again to support to

luca.lacchini — Mon, 10 Oct 2016 11:08:52 GMT

I asked again to support to have another image and it works.