topic NAT pre 8.3 conversion HELP in Network Security

NAT pre 8.3 conversion HELP

Lee Murphy — Tue, 12 Mar 2019 08:18:44 GMT

I am needing a little help converting these rules from a 5510 to a 5520 running 9.1:

global (outside) 1 10.10.50.11-10.10.50.249 netmask 255.255.255.0

nat (inside) 0 access-list NONAT
nat (inside) 1 10.0.0.0 255.0.0.0

static (inside,outside) 10.10.50.7 10.71.29.107 netmask 255.255.255.255

static (inside,outside) interface 10.71.29.108 netmask 255.255.255.255

What I got is this:

object network obj_any-01
subnet 0.0.0.0 0.0.0.0
object network obj-10.10.50.11-10.10.50.249
range 10.10.50.11 10.10.50.249

object network obj_any-01
nat (inside,outside) dynamic obj-10.10.50.11-10.10.50.249

Am I on the right track?

Marvin Rhoads — Fri, 23 Sep 2016 02:47:03 GMT

It looks like you're only giving us part of the NAT rules so it's hard to say knowing that we're missing key bits.

I've use the free tool at tunnelsup with good results for several migrations:

http://www.tunnelsup.com/nat-converter/

Lee Murphy — Fri, 23 Sep 2016 16:34:57 GMT

That tool really confirmed what I needed... Thanks