topic ASA 5525 and 5510, firepower module support in Network Security

ASA 5525 and 5510, firepower module support

cristian.munoz — Fri, 21 Feb 2020 17:05:32 GMT

Hi All

I have three ASA firewalls and I need know the firepower module are supported.

The models are:

ASA 5525 version 9.2(2)4

ASA 5525 version 9.6(4)3

ASA 5510 version 9.1(7)23

TIA

Cristian

Re: ASA 5525 and 5510, firepower module support

GRANT3779 — Tue, 30 Apr 2019 14:44:59 GMT

Hi,

ASA 5525 version 9.2(2)4 - The highest Firepower Version you can support on this is 5.4.0 This is EOS on 30/11/2020. You would want to upgrade the ASA Software on this to support a newer version of FP.

ASA 5525 version 9.6(4)3 - 6.4 is supported

ASA 5510 version 9.1(7)23 - Firepower unsupported on this device in general.

Re: ASA 5525 and 5510, firepower module support

cristian.munoz — Thu, 02 May 2019 20:04:45 GMT

For the ASA 5525 version 9.6(4)3 , what I need for install the FP service module? It requires an additional hardware?

TIA
Cristian

Re: ASA 5525 and 5510, firepower module support

GRANT3779 — Thu, 02 May 2019 21:07:25 GMT

You will need an ssd if you haven't installed one already.

You can check by running

Show inventory

Also run show module to see if there is any installation of an SFR.