https://community.cisco.com/t5/network-security/basic-pix-525-configuration/m-p/2879794#M157868 <P>Hello Everybody,</P> <P></P> <P>What are the basic commands to configure PAT on a PIX 525 (I've only the global interface public IP address available for the PAT and a class C network for the inside)</P> <P></P> <P>Thanks in advance for your replies</P> <P>NH</P> <P></P> Tue, 12 Mar 2019 07:42:53 GMT Haouideche2015 2019-03-12T07:42:53Z https://community.cisco.com/t5/network-security/basic-pix-525-configuration/m-p/2879794#M157868 <P>Hello Everybody,</P> <P></P> <P>What are the basic commands to configure PAT on a PIX 525 (I've only the global interface public IP address available for the PAT and a class C network for the inside)</P> <P></P> <P>Thanks in advance for your replies</P> <P>NH</P> <P></P> Tue, 12 Mar 2019 07:42:53 GMT https://community.cisco.com/t5/network-security/basic-pix-525-configuration/m-p/2879794#M157868 Haouideche2015 2019-03-12T07:42:53Z https://community.cisco.com/t5/network-security/basic-pix-525-configuration/m-p/2879795#M157869 <P>You really want to connect a device to the internet that didn't get any security patches for at least seven years (assuming you are running the latest software)? Well, good luck ...</P> <PRE class="prettyprint">nat (inside) 1 YOUR-NETWORK 255.255.255.0<BR />global (outside) 1 interface</PRE> Thu, 05 May 2016 22:37:12 GMT https://community.cisco.com/t5/network-security/basic-pix-525-configuration/m-p/2879795#M157869 Karsten Iwen 2016-05-05T22:37:12Z https://community.cisco.com/t5/network-security/basic-pix-525-configuration/m-p/2879796#M157870 <P>Thanks for your answer...</P> Sat, 07 May 2016 18:38:59 GMT https://community.cisco.com/t5/network-security/basic-pix-525-configuration/m-p/2879796#M157870 Haouideche2015 2016-05-07T18:38:59Z