topic Hi Arshad, in Network Security

NAT from outside to inside

arshad_cisco86 — Tue, 12 Mar 2019 06:50:46 GMT

Hi ,

kindly suggest the configuration URL for natting from outside to inside interface .

Regards

Arshad Ayub

Hello,

Akira Muranaka — Sat, 07 Nov 2015 15:44:15 GMT

Hello,

I think this document will help you. See "ASA Version 8.3 and Later" setting if you use ASA 8.3+ version.

NAT and PAT Statement Use on the Cisco Secure ASA Firewall Configuration Example
http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/15243-19.html#anc4

Hi Akira , Thanks for this ..

arshad_cisco86 — Tue, 10 Nov 2015 15:57:37 GMT

Hi Akira , Thanks for this ..

But i need dynamic NAT for outside to inside ...(CCIE TOPIC)

Regards

Arshad Ayub

Hi Arshad,

Akshay Rastogi — Tue, 10 Nov 2015 16:31:40 GMT

Hi Arshad,

You could configure Outside nat. Use the link below :

http://www.cisco.com/c/en/us/td/docs/security/asa/asa82/configuration/guide/config/nat_dynamic.html#wp1079227

Outside nat is configured by using 'outside' keyword at the end ot nat statement. Use the above link and search for ' Outside NAT and Inside NAT Combined'.

Hope it helps.

Regards,

Akshay Rastogi

Remember to mark the answer as correct if it answers your queries or rate the helpful posts.

Hi Akshay ,

arshad_cisco86 — Wed, 11 Nov 2015 10:36:18 GMT

Hi Akshay ,

above link is very usefull for me .....

I got some configuration retaled to this, your suggstion is also very perfect for me .

Thanks you very much

Regards

Arshad Ayub

Hi Arshad,

Akshay Rastogi — Wed, 11 Nov 2015 11:09:23 GMT

Hi Arshad,

You are welcome.

Regards,

Akshay Rastogi

Remember to mark the answer as correct or rate the helpful posts.