topic ASA firewall in Network Security

ASA firewall

philbert_manalo — Tue, 12 Mar 2019 06:47:11 GMT

hi,

i configured Cisco ASA 5508-x connected to switch, when i tap into native vlan using Rj45, i got an ip address of 192.168.0.x which is good and also i can browse the internet. but when i tap into VLAN 2 or the other VLAN's, i can get an ip address but cannot go to internet? i already configured sub-interface on the ASA.

thank you!

Philbert

Hi Philbert,Please check if

Akshay Rastogi — Fri, 23 Oct 2015 02:21:40 GMT

Hi Philbert,

Please check if the port on switch is trunk with allowed vlan 2 in that trunk. Also nat statement is configured for host behind sub-interface (something like nat (<sub-interface-nameif>,outside) dynamic interface.

Regards,

Akshay Rastogi

hi Akshay,thanks for you help

philbert_manalo — Sat, 24 Oct 2015 01:56:10 GMT

hi Akshay,

thanks for you help, i can now get my vlans to internet..im on a testing because it is slow? by the way thanks for the help..

Cheers!

Philbert