https://community.cisco.com/t5/network-security/in-an-asa-in-transparent-mode-it-is-necesary-to-configure-an-ip/m-p/2893259#M171906 <P>Yes, each bridge group requires a management IP that is within the same subnet as the connected network for that bridge group.</P> <P>--</P> <P>Please remember to select a correct answer and rate helpful posts</P> Tue, 08 Mar 2016 19:42:17 GMT Marius Gunnerud 2016-03-08T19:42:17Z https://community.cisco.com/t5/network-security/in-an-asa-in-transparent-mode-it-is-necesary-to-configure-an-ip/m-p/2893258#M171904 <P>I have a 5585X ASA working in transparent mode, I need to create multiple bridge-groups, is strictly necessary to configure an IP address in all the bridge-groups?</P> <P>I am running IOS ver 9.2.4.</P> <P>Thanks.</P> Tue, 12 Mar 2019 07:27:22 GMT https://community.cisco.com/t5/network-security/in-an-asa-in-transparent-mode-it-is-necesary-to-configure-an-ip/m-p/2893258#M171904 vulatec89 2019-03-12T07:27:22Z https://community.cisco.com/t5/network-security/in-an-asa-in-transparent-mode-it-is-necesary-to-configure-an-ip/m-p/2893259#M171906 <P>Yes, each bridge group requires a management IP that is within the same subnet as the connected network for that bridge group.</P> <P>--</P> <P>Please remember to select a correct answer and rate helpful posts</P> Tue, 08 Mar 2016 19:42:17 GMT https://community.cisco.com/t5/network-security/in-an-asa-in-transparent-mode-it-is-necesary-to-configure-an-ip/m-p/2893259#M171906 Marius Gunnerud 2016-03-08T19:42:17Z