https://community.cisco.com/t5/network-security/anyconnect-queries/m-p/2883138#M172299 <P>Hi All,</P> <P>Anyone can advise what technologies I can implement in order for the Anyconnect clients connected to Site A and at the same time go access site B. Both sites having site to site tunnel up and accessible via LAN connection.</P> <P></P> <P>Thanks.</P> Tue, 12 Mar 2019 07:22:27 GMT wayne loh 2019-03-12T07:22:27Z https://community.cisco.com/t5/network-security/anyconnect-queries/m-p/2883138#M172299 <P>Hi All,</P> <P>Anyone can advise what technologies I can implement in order for the Anyconnect clients connected to Site A and at the same time go access site B. Both sites having site to site tunnel up and accessible via LAN connection.</P> <P></P> <P>Thanks.</P> Tue, 12 Mar 2019 07:22:27 GMT https://community.cisco.com/t5/network-security/anyconnect-queries/m-p/2883138#M172299 wayne loh 2019-03-12T07:22:27Z https://community.cisco.com/t5/network-security/anyconnect-queries/m-p/2883139#M172300 <P>Hi Wayne,</P> <P></P> <P>For Anyconnect traffic to work through the tunnel make sure the crypto ACL for the site to site VPN tunnels have the Anyconnect traffic permitted.</P> <P>You also need to make sure that correct NAT statements are in place for this traffic.</P> <P></P> <P><G class="gr_ gr_156 gr-alert gr_gramm undefined Punctuation multiReplace" id="156" data-gr-id="156">Also</G> you need to allow the site B subnet in the split tunnel ACL in the Anyconnect group policy.</P> <P></P> <P>Please refer to the following discussion for more clarity:</P> <P></P> <P>https://supportforums.cisco.com/discussion/11106586/cisco-asa-5505-site-site-vpn-and-remote-access-vpn-problem</P> <P></P> <P>Regards,</P> <P></P> <P>Aditya</P> <P></P> Mon, 22 Feb 2016 10:37:55 GMT https://community.cisco.com/t5/network-security/anyconnect-queries/m-p/2883139#M172300 Aditya Ganjoo 2016-02-22T10:37:55Z