topic running 9.1(2) in Network Security

ASA 5525-X generating Failover Primary Closed (302014)

Mark Nachreiner — Tue, 12 Mar 2019 07:15:29 GMT

I continually receive the below syslog message and need some guidance on troubleshooting to resolve the error. I looked through the syslog meanings and Cisco states no action required. This message occurs continually throughout the day. Any help is much appreciated. I know what is happening but not sure the approach to resolve it. The traffic is actually coming from a Site to site tunnel.

All interfaces are configured with standby IP with stateful failover and are showing no issue with show failover output. it is only this interface that is experiencing the error.

%ASA-6-302014: Teardown TCP connection xxxxxxxxx for outside:x.x.x.x/xxxxx to inside:x.x.x.x/xxx duration 0:00:00 bytes 0 Failover primary closed

What release software are you

Philip D'Ath — Tue, 09 Feb 2016 01:24:53 GMT

What release software are you using on your ASA?

running 9.1(2)

Mark Nachreiner — Tue, 09 Feb 2016 01:32:32 GMT

running 9.1(2)

That train is now up to 9.1(7

Philip D'Ath — Tue, 09 Feb 2016 01:38:56 GMT

That train is now up to 9.1(7), which is also a gold star release. I would move up to the current version in that train before doing anything further, as it could be a resolved issue.

I will schedule in the next

Mark Nachreiner — Wed, 10 Feb 2016 00:21:57 GMT

I will schedule in the next few weeks and report back