ping does not work with no nat config

mahesh18 — Tue, 12 Mar 2019 06:57:40 GMT

Hi Everyone,

Here is setup

Sw1---192.168.50.226-----------Firewall---------------192.168.50.230--Sw2

From Switch 1 i am trying to ping the interface IP of switch 2 which is directly connected to firewall but itdoes not work.

Firewall has no NAT config.

Here are logs from firewall

Nov 28 2015 03:35:19: %ASA-7-609001: Built local-host inside:192.168.50.226
Nov 28 2015 03:35:19: %ASA-7-609001: Built local-host outside:192.168.50.230
Nov 28 2015 03:35:19: %ASA-6-302020: Built outbound ICMP connection for faddr 192.168.50.230/0 gaddr 192.168.50.226/1893 laddr 192.168.50.226/1893
Nov 28 2015 03:35:25: %ASA-7-111009: User 'enable_15' executed cmd: show logging
Nov 28 2015 03:35:26: %ASA-6-302021: Teardown ICMP connection for faddr 192.168.50.230/0 gaddr 192.168.50.226/1893 laddr 192.168.50.226/1893

Regards

MAhesh

Mahesh,

Marvin Rhoads — Sat, 28 Nov 2015 18:49:54 GMT

Mahesh,

Does switch 2 have a default gateway (or default or static route if it's a L3 switch) entry pointing back to the ASA outside interface?

Seems switch2 does not had

mahesh18 — Sun, 29 Nov 2015 05:23:16 GMT

Seems switch2 does not had route back to ASA outside interface IP.

Regards

MAhesh

topic Seems switch2 does not had in Network Security

ping does not work with no nat config

Mahesh,

Seems switch2 does not had