topic Hi, You can try using "debug in Network Security

Cisco ASA 5585 - SFR boot log

kiki.marconio — Tue, 12 Mar 2019 06:42:53 GMT

How do I see SFR boot log on ASA5585?

ASA's with software based sfr have: "sh module sfr log console", what is the same command for 5585?

Basiclly, I am having problems with upgrading from 5.3 to 5.4 and I would like to see whats going on during upgrade, since the message on FS MC is only "Installation Failed".

BR, Kiki

Hi, You can try using "debug

Rishabh Seth — Thu, 08 Oct 2015 08:07:25 GMT

Hi,

You can try using "debug module-boot 255" and check the logs. This will show real time logs on the cli and not historical logs. You will need to enable logs and then try the installation.

To disable debug: "undebug all"

In case you face issue you can reach out TAC for further help.

Hope it helps!!!

Thanks,

R.Seth

Don't forget to mark the answer as correct if it helps in resolving your query!!!

Thank you, Rishabh,This is

kiki.marconio — Mon, 12 Oct 2015 07:54:30 GMT

Thank you, Rishabh,

This is first step (good one) to see what's going on with the module, but with "sh module sfr log console" on ASA's without HW module, you can see what is going on with services on the module during upgrades. I guess there should be a command on HW module where we could see where did the module stuck, during an upgrade?

BR, K.