topic It exports the names of the in Network Security

ASA Config Export - 8.4.7

dennis_range — Tue, 12 Mar 2019 06:36:16 GMT

I am trying to export a config from a 5520 running 8.4.7 that includes all network objects. Presently I only get network object groups and the rest are IP addresses. Without changing anything on a 5540 running 8.2.5 it exported everything as desired - both network objects and network object groups. Cannot find the setting associated with this. Any help would be greatly appreciated. Thanks!

If you just need the

Josh Sprang — Tue, 15 Sep 2015 20:26:37 GMT

If you just need the configuration you can run:

copy start tftp

from the cli. You'll need to set up tftpd32 from your laptop or another device and point it there.

Sorry - I meant to say the

dennis_range — Tue, 15 Sep 2015 20:29:28 GMT

Sorry - I meant to say the ACL export via ASDM.

I see so in ASDM ->

Josh Sprang — Tue, 15 Sep 2015 20:40:38 GMT

I see so in ASDM -> configuration -> access rules-> export it does not break out the acls with object groups in them?

If so, a show access-list will break these out from the cli... Will that work?

Hi,You would not be able to

Vibhor Amrodia — Thu, 17 Sep 2015 11:18:24 GMT

Hi,

You would not be able to use the Network Objects as they are only available on ASA 8.3 +.

Thanks and Regards,

Vibhor Amrodia

It exports the names of the

dennis_range — Thu, 17 Sep 2015 19:17:59 GMT

It exports the names of the network object groups but not the network objects.

It works fine with 8.2.5 but

dennis_range — Thu, 17 Sep 2015 19:18:24 GMT

It works fine with 8.2.5 but not with 8.4.7.