https://community.cisco.com/t5/network-security/asa-failover/m-p/2756867#M179373 <P>Hi&nbsp;</P><P>&nbsp;</P><P>does any one know weather or not I will need a special intelligent &nbsp;cable to support the fail over feature on the ASA 5512 x model or can be done over Ethernet ?&nbsp;</P><P>&nbsp;</P><P>thanks in advance&nbsp;</P> Tue, 12 Mar 2019 06:32:23 GMT aaronkb2002 2019-03-12T06:32:23Z https://community.cisco.com/t5/network-security/asa-failover/m-p/2756867#M179373 <P>Hi&nbsp;</P><P>&nbsp;</P><P>does any one know weather or not I will need a special intelligent &nbsp;cable to support the fail over feature on the ASA 5512 x model or can be done over Ethernet ?&nbsp;</P><P>&nbsp;</P><P>thanks in advance&nbsp;</P> Tue, 12 Mar 2019 06:32:23 GMT https://community.cisco.com/t5/network-security/asa-failover/m-p/2756867#M179373 aaronkb2002 2019-03-12T06:32:23Z https://community.cisco.com/t5/network-security/asa-failover/m-p/2756868#M179374 <P>It only works with Ethernet. The PIX supported a serial failover-cable, but that's not available any more on the ASA.</P> Thu, 03 Sep 2015 11:26:14 GMT https://community.cisco.com/t5/network-security/asa-failover/m-p/2756868#M179374 Karsten Iwen 2015-09-03T11:26:14Z https://community.cisco.com/t5/network-security/asa-failover/m-p/2756869#M179375 <P>Hi Karsten ,&nbsp;</P><P>&nbsp;</P><P>would you be able to take a look at a design proposal and device configs ?&nbsp;</P> Fri, 04 Sep 2015 08:47:41 GMT https://community.cisco.com/t5/network-security/asa-failover/m-p/2756869#M179375 aaronkb2002 2015-09-04T08:47:41Z https://community.cisco.com/t5/network-security/asa-failover/m-p/2756870#M179376 <P>Just post it here and you'll get input on your setup.</P> Fri, 04 Sep 2015 09:21:24 GMT https://community.cisco.com/t5/network-security/asa-failover/m-p/2756870#M179376 Karsten Iwen 2015-09-04T09:21:24Z