ASA on Firepower hardware - SNMP SysObjId

mbilgrav — Fri, 21 Feb 2020 17:16:18 GMT

Heelo Forum,

I seem to have run into a Management issue, after upgrading FXOS/ASA bundle software on Firepower hardware

I run FP-2130 hardware and ASA VA, in CONTEXT mode

Problem seem to me like the ASA OID has changed and is now the same as the FXOS SysObjectId, making it incorrect for my NMS to handle

I am sure this WAS true back in the days (As I have noted it down adding to NMS):

FPR-2110 FXOS OID 1.3.6.1.4.1.9.1.2404
ASA SC OID 1.3.6.1.4.1.9.1.2317

FPR-2130 OID 1.3.6.1.4.1.9.1.2406
ASA SC OID 1.3.6.1.4.1.9.1.2319

Looks like Current 2110 and 2130 when in Context modes, reports SNMP SYSOBJECTID, same OID as the Firepower FXOS OID, and not the ASA SC OID !

TRUE TODAY:

ASA context, (ASA running on Firepower 2130 hardware:)
snmpwalk.exe -M mibs -v 2c -c REMOVED 10.666.666.14 1.3.6.1.2.1.1.2
iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.9.1.2406

Firepower Management Interface (FXOS)
snmpwalk.exe -M mibs -v 2c -c REMOVED 10.666.666.11 1.3.6.1.2.1.1.2
iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.9.1.2406

THEY ARE THE SAME !

Or is it just me ?

version is FXOS Version 2.3(1.131) / ASA Version 9.9(2)40

topic ASA on Firepower hardware - SNMP SysObjId in Network Security

ASA on Firepower hardware - SNMP SysObjId