https://community.cisco.com/t5/network-security/remotely-monitoring-asa-with-firepower-services-via-3rd-party/m-p/2725530#M18484 <P>I need to know how to monitor ASA with FirePower Services for both hardware modules on ASA 5585-X and software modules on all other ASA platforms - using either SNMP traps, syslog messages or API&nbsp;on a ScienceLogic EM7 platform.</P><P>Where can I find information that describes how to tell if the hardware module in the ASA 5585-X chassis is up or down, if the software module in the other ASA platforms is operational, what KPI's and&nbsp;traps to monitor, what syslog messages to look for and/or what XML data objects to extract?</P><P>What is a necessary and sufficient set of faults in order to&nbsp;satisfy&nbsp;basic health and status monitoring requirements for&nbsp;FirePower?</P><P>I found a document&nbsp;describing faults for the FirePower 9300 series - but this appears to be a stand-alone appliance.&nbsp;&nbsp;Does this information apply&nbsp;for ASA with FirePower or is it unique to the 9300 series?</P><P>Thanks</P> Fri, 16 Oct 2015 17:13:50 GMT scmccoma 2015-10-16T17:13:50Z https://community.cisco.com/t5/network-security/remotely-monitoring-asa-with-firepower-services-via-3rd-party/m-p/2725530#M18484 <P>I need to know how to monitor ASA with FirePower Services for both hardware modules on ASA 5585-X and software modules on all other ASA platforms - using either SNMP traps, syslog messages or API&nbsp;on a ScienceLogic EM7 platform.</P><P>Where can I find information that describes how to tell if the hardware module in the ASA 5585-X chassis is up or down, if the software module in the other ASA platforms is operational, what KPI's and&nbsp;traps to monitor, what syslog messages to look for and/or what XML data objects to extract?</P><P>What is a necessary and sufficient set of faults in order to&nbsp;satisfy&nbsp;basic health and status monitoring requirements for&nbsp;FirePower?</P><P>I found a document&nbsp;describing faults for the FirePower 9300 series - but this appears to be a stand-alone appliance.&nbsp;&nbsp;Does this information apply&nbsp;for ASA with FirePower or is it unique to the 9300 series?</P><P>Thanks</P> Fri, 16 Oct 2015 17:13:50 GMT https://community.cisco.com/t5/network-security/remotely-monitoring-asa-with-firepower-services-via-3rd-party/m-p/2725530#M18484 scmccoma 2015-10-16T17:13:50Z