topic here is show run,name 192.168 in Network Security

RDP between 2 internal Vlans on ASA 5505

doraids80 — Tue, 12 Mar 2019 06:03:45 GMT

Hello ASA Engineers,

I am trying to allow RDP from the data Vlan 192.168.1.0 (inside_network) to the Voice Vlan server 192.168.20.6 (Voice_Vlan_network), I managed to allow ICMP between the 2 vlans, can anyone help me configure RDP from 192.168.1.0 network to 192.168.20.6 server? Thanks in advance.

Hi,It depends on the existing

Vibhor Amrodia — Sat, 06 Jun 2015 02:05:57 GMT

Hi,

It depends on the existing configuration that you have on the ASA device.

I would request you to post the relevant configuration so that we can verify if the traffic will work or not ?

Also , try to simulate the traffic on the ASA device using the packet tracer feature:-

https://supportforums.cisco.com/document/29601/troubleshooting-access-problems-using-packet-tracer

Thanks and Regards,

Vibhor Amrodia

here is show run,name 192.168

doraids80 — Mon, 15 Jun 2015 15:31:52 GMT

The line below should allow

JEFF SPRADLING — Mon, 15 Jun 2015 15:31:53 GMT

The line below should allow all IP traffic from inside to the voice vlan:

access-list inside_access_in extended permit ip 192.168.1.0 255.255.255.0 192.168.20.0 255.255.255.0

Agree with Vibhor, you should run packet tracer on the firewall to see where it's being dropped:

packet-tracer input inside tcp 192.168.1.1 4444 192.168.20.1 3389 detailed