topic I changed the sfr IP to the in Network Security

ASA5506 and FirePower module ADSM

rasoftware — Tue, 12 Mar 2019 05:51:13 GMT

Got an ASA5506 with FirePower module. I can only access this via ASDM on the management interface. I changed the IP so it ran on my "inside" but it can't contact the module on that IP and it takes an age to loads the ADSM without it. Is this possible?

The FirePOWER (sfr) module

Marvin Rhoads — Tue, 28 Apr 2015 15:38:21 GMT

The FirePOWER (sfr) module needs to use the physical management interface. The recommended and supported way to manage the combined unit is documented in the ASA 5506 Quick Start Guide.

Short answer is they recommend the sfr management address is bound to M1/1 and part of the same subnet as the Inside address - and use the Inside interface as its gateway.

I changed the sfr IP to the

rasoftware — Tue, 28 Apr 2015 15:46:44 GMT

I changed the sfr IP to the same as the internal network as per the quick start and it now passed that during ASDM loadup (i tried this earlier and change it back but now it working). However, the FirePower button is now missing for ADSM...

I changed the sfr IP to the

rasoftware — Tue, 28 Apr 2015 15:51:58 GMT

I changed the sfr IP to the

rasoftware — Tue, 28 Apr 2015 15:52:31 GMT

I changed the sfr IP to the

rasoftware — Tue, 28 Apr 2015 15:52:39 GMT

I changed the sfr IP to the

rasoftware — Tue, 28 Apr 2015 15:52:50 GMT