ASA firewall Command authorization failed

Mohd Imtiaz Hussain — Tue, 12 Mar 2019 06:30:19 GMT

Hi,

Iam getting Command authorization failed after adding "aaa authorization command TACACS+ LOCAL" on asa firewall.

Added the firewall in tacacs server.

Before adding the aaa

Rishabh Seth — Thu, 27 Aug 2015 17:23:28 GMT

Before adding the aaa authorization command, use "test aaa authorization" command to ensure that there is proper connectivity to the tacacs server and correct permissions are provided to the user.

Refer following link:

http://www.cisco.com/c/en/us/td/docs/security/asa/asa-command-reference/T-Z/cmdref4/t1.html#pgfId-1562072

If this is failing then check the aaa authentication configuration:

http://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/asa_90_cli_config/aaa_servers.html

Hope it helps.

R.Seth

topic Before adding the aaa in Network Security

ASA firewall Command authorization failed

Before adding the aaa