topic Do you have the Security Plus in Network Security

5510 Installing High Availability

TOM FRANCHINA — Tue, 12 Mar 2019 06:26:38 GMT

We have a 5510 running the following version:

Cisco Adaptive Security Appliance Software Version 8.2(1)11
Device Manager Version 6.2(1)

WMHFW5510 up 1 year 157 days

Hardware: ASA5510-K8, 256 MB RAM, CPU Pentium 4 Celeron 1600 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB

We would like to install a high availability unit along side the running unit. Will the Primary unit need to be reloaded to complete the configuration and have the second unit become a active standby.

Thanks,

Tom

Do you have the Security Plus

Marvin Rhoads — Mon, 17 Aug 2015 21:15:27 GMT

Do you have the Security Plus license on both units? It's a prerequisite on the 5510.

No reload of the Primary-Active will be necessary to add a Secondary-Standby unit.

Marvin,Thanks. It appears we

TOM FRANCHINA — Tue, 18 Aug 2015 13:05:07 GMT

Marvin,

Thanks. It appears we have the license:

Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 100
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
SSL VPN Peers : 2
Total VPN Peers : 250
Shared License : Disabled
AnyConnect for Mobile : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials : Disabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions : 2
Total UC Proxy Sessions : 2
Botnet Traffic Filter : Disabled

This platform has an ASA 5510 Security Plus license.