help creating ACL's

Richard Langly — Tue, 12 Mar 2019 06:17:32 GMT

I have a 5506-X running 9.4.1 and would like to ask for help on creating the following ACL's.

Thank you,

Service Port Protocol Direction DNS

SIP+TLS    5061                     TCP         Out
SRTP        10000 - 65534    UDP         Both
STUN        3478 - 3479          UDP        Both           stun01.silentcircle.net ; stun02.silentcircle.net

Hi Richard,this command may

aydinnmu1 — Mon, 20 Jul 2015 13:12:35 GMT

Hi Richard,

this command may be helpful for you.

access-list NAME1 permit tcp any4 any4 eq 5061

access-list NAME1 permit udp any4 any4 range 10000 65534

access-list NAME1 permit udp any4 any4 range 3478 3479

access-list NAME2 permit udp any4 range 10000 65534 any4

access-list NAME2 permit udp any4 range 3478 3479 any4

access-group NAME1 interface OUTSIDE in

access-group NAME2 interface INSIDE in

LOCAL---------inside_int-OO-outside_int----------INTERNET

You can change any4 with your ip range. any4 statement refer to ipv4 addressses.

Best regards.

topic Hi Richard,this command may in Network Security

help creating ACL's

Hi Richard,this command may