Command to see host and static nat for the same object together

eburgywvde — Tue, 12 Mar 2019 05:46:14 GMT

I have researched this but cannot find an answer. ASA running version 8.5.

When you create the config using object NAT you enter the commands as follows

object network <object name>

host x.x.x.x

nat (inside,outside) static y.y.y.y

When the config is displayed it separates the host and nat commands in two different sections of the config as follows

object network <object name>

host x.x.x.x

object network <object name>

nat (inside,outside) static y.y.y.y

Is there a command that will display it all together (like it was typed in)? Show NAT is something like what I am after but without all of the extra info such as translate_hits, untranslate_hits etc. I need this information but cleaning up the output of a show nat is going to be tough.

Any suggestions?

Thanks.

hi,try show nat detail?

johnlloyd_13 — Tue, 14 Apr 2015 14:54:10 GMT

hi,

try show nat detail?

Sorry, show nat detail is

eburgywvde — Tue, 14 Apr 2015 15:36:45 GMT

Sorry, show nat detail is what I meant in the original post in place of show nat. Show nat detail still has all of the extra info I was trying to avoid. Guess I will be editing a text file.

Thanks for the reply.

topic Sorry, show nat detail is in Network Security

Command to see host and static nat for the same object together

hi,try show nat detail?

Sorry, show nat detail is