topic Problem: ERROR: Unable to add Policy Rules in Network Security

Problem: ERROR: Unable to add Policy Rules

Anderson Ribeiro — Tue, 12 Mar 2019 05:40:04 GMT

Hi guys!

I have a Cisco 6509 with a FWSM.

In FWSM I have a 2 contexts.

Today I tried put a nat line and I received the message:

fwsm-virtual/fw01spo(config)# nat (NUVEM-NEG) 47 access-list NUVEM
ERROR: Unable to add Policy Rules
fwsm-virtual/fw01spo(config)# Access Rules Download Complete: Memory Utilization: 35%

Have you any idea about this?

Thank you.

Hi,Check this Document and

Vibhor Amrodia — Tue, 24 Mar 2015 11:46:33 GMT

Hi,

Check this Document and collect the respective NP ouputs from the FWSM and also check the elements of the ACl that you are using in this NAT statement.

https://supportforums.cisco.com/document/33031/fwsm-addressing-multiple-context-acl-limit-reached-issues

https://supportforums.cisco.com/document/50566/fwsm-acl-resource-partition-limits-and-troubleshooting#ACL_Partition_Optimization

Thanks and Regards,

Vibhor Amrodia