https://community.cisco.com/t5/network-security/asa-acl-stateful-query/m-p/2561785#M203008 <P>Hi,</P><P>Yes , you are correct. You don't need any ACL policy for the return traffic.</P><P>Thanks and Regards,</P><P>Vibhor Amrodia</P> Thu, 27 Nov 2014 13:43:40 GMT Vibhor Amrodia 2014-11-27T13:43:40Z https://community.cisco.com/t5/network-security/asa-acl-stateful-query/m-p/2561784#M203007 <P>Hi All,</P><P>Just looking for some confirmation. I have an ASA and will be applying an ACL Inbound on the Outside Interface for certain ports / hosts.</P><P>There are&nbsp;no outbound restrictions - so If a host initiates traffic from Inside to the Outside, I assume the return traffic will be allowed back even if there is no entry in&nbsp;the Inbound ACL? Due to the ASA being stateful?</P><P>&nbsp;</P><P>Thanks</P> Tue, 12 Mar 2019 05:08:44 GMT https://community.cisco.com/t5/network-security/asa-acl-stateful-query/m-p/2561784#M203007 GRANT3779 2019-03-12T05:08:44Z https://community.cisco.com/t5/network-security/asa-acl-stateful-query/m-p/2561785#M203008 <P>Hi,</P><P>Yes , you are correct. You don't need any ACL policy for the return traffic.</P><P>Thanks and Regards,</P><P>Vibhor Amrodia</P> Thu, 27 Nov 2014 13:43:40 GMT https://community.cisco.com/t5/network-security/asa-acl-stateful-query/m-p/2561785#M203008 Vibhor Amrodia 2014-11-27T13:43:40Z