https://community.cisco.com/t5/network-security/juniper-to-cisco-application-layer-gateway/m-p/2584917#M205917 <P>Hi There</P><P>I'm busy converting juniper to Cisco line by line I've used the Cisco tool but had some errors that I'm now fixing manually. how do I convert the Juniper application layer gateway to a Cisco ASA format, see below.</P><P>The (set policy id 663 application "FTP")&nbsp; command is my problem</P><P>set policy id 663 name "110307-000124" from "Trust" to "VPN"&nbsp; "SS-AGSERVICES" "SS-SERVERS" "FTP" permit log<BR />set policy id 663 application "FTP"</P><P>&nbsp;</P> Tue, 12 Mar 2019 04:56:43 GMT CSC011240286 2019-03-12T04:56:43Z https://community.cisco.com/t5/network-security/juniper-to-cisco-application-layer-gateway/m-p/2584917#M205917 <P>Hi There</P><P>I'm busy converting juniper to Cisco line by line I've used the Cisco tool but had some errors that I'm now fixing manually. how do I convert the Juniper application layer gateway to a Cisco ASA format, see below.</P><P>The (set policy id 663 application "FTP")&nbsp; command is my problem</P><P>set policy id 663 name "110307-000124" from "Trust" to "VPN"&nbsp; "SS-AGSERVICES" "SS-SERVERS" "FTP" permit log<BR />set policy id 663 application "FTP"</P><P>&nbsp;</P> Tue, 12 Mar 2019 04:56:43 GMT https://community.cisco.com/t5/network-security/juniper-to-cisco-application-layer-gateway/m-p/2584917#M205917 CSC011240286 2019-03-12T04:56:43Z https://community.cisco.com/t5/network-security/juniper-to-cisco-application-layer-gateway/m-p/2584918#M205918 <P>Hi,</P><P>On the ASA device , you don't have to explicitly specify the Layer 7 policies.</P><P>You only need to enable the inspection for that specific protocol.</P><P>Thanks and Regards,</P><P>Vibhor Amrodia</P> Fri, 17 Oct 2014 10:32:07 GMT https://community.cisco.com/t5/network-security/juniper-to-cisco-application-layer-gateway/m-p/2584918#M205918 Vibhor Amrodia 2014-10-17T10:32:07Z