topic Re: access to inside network from one host in Network Security https://community.cisco.com/t5/network-security/access-to-inside-network-from-one-host/m-p/4014081#M23096 <P>Hi,</P><P>&nbsp;</P><P>You need to configure access-list then need to apply it to the interface:</P><P>&nbsp;</P><P>access-list OUTSIDE extended permit ip host 192.168.0.230 10.1.1.0 255.255.255.0</P><P>access-group OUTSIDE in interface outside</P><P>&nbsp;</P> Sun, 19 Jan 2020 03:54:28 GMT Muhammad Awais Khan 2020-01-19T03:54:28Z access to inside network from one host https://community.cisco.com/t5/network-security/access-to-inside-network-from-one-host/m-p/4014052#M23095 <P>I am running ver 8.2 on cisco ASA 5505</P><P>interface VLAN1</P><P>nameif inside</P><P>IP address 10.1.1.0 255.255.255.0</P><P>&nbsp;</P><P>interfacve VLAN2</P><P>nameif outside</P><P>ip address DHCP setroute</P><P>&nbsp;</P><P>outside subnet 192.168.0.0 255.255.255.0</P><P>I would like to configure so that only one client 192.168.0.230 to access any PCs on the inside network</P><P>how do i accomplish this task?&nbsp;</P><P>&nbsp;</P><P>thanks</P><P>&nbsp;</P> Sat, 18 Jan 2020 23:59:16 GMT https://community.cisco.com/t5/network-security/access-to-inside-network-from-one-host/m-p/4014052#M23095 johnnyleco 2020-01-18T23:59:16Z Re: access to inside network from one host https://community.cisco.com/t5/network-security/access-to-inside-network-from-one-host/m-p/4014081#M23096 <P>Hi,</P><P>&nbsp;</P><P>You need to configure access-list then need to apply it to the interface:</P><P>&nbsp;</P><P>access-list OUTSIDE extended permit ip host 192.168.0.230 10.1.1.0 255.255.255.0</P><P>access-group OUTSIDE in interface outside</P><P>&nbsp;</P> Sun, 19 Jan 2020 03:54:28 GMT https://community.cisco.com/t5/network-security/access-to-inside-network-from-one-host/m-p/4014081#M23096 Muhammad Awais Khan 2020-01-19T03:54:28Z