topic Re: how to add AnyConnect to ASA 2100 series in Network Security

how to add AnyConnect to ASA 2100 series

kieshansomai1848 — Mon, 06 Jan 2020 17:45:08 GMT

dear all,

I want to add AnyConnect to ASA 2100 series.

Does anyone have a full documentation for me?

Is the FPR2110-ASA-K9 still supported ?

please help

Re: how to add AnyConnect to ASA 2100 series

Rob Ingram — Mon, 06 Jan 2020 17:49:59 GMT

Hi,

Yes FPR2110-ASA-K9 is still supported. I assume you just want an example how to configure an AnyConnect Remote Access VPN on the ASA, example here.

HTH

Re: how to add AnyConnect to ASA 2100 series

kieshansomai1848 — Mon, 06 Jan 2020 17:57:36 GMT

thank you for the link,

does the FPR2110-ASA-K9 have a smartnet support ?

Re: how to add AnyConnect to ASA 2100 series

Rob Ingram — Mon, 06 Jan 2020 18:00:34 GMT

You'd have to check to see if it was purchased with it.

Re: how to add AnyConnect to ASA 2100 series

kieshansomai1848 — Mon, 06 Jan 2020 18:16:22 GMT

Is there a trial version available to test the AnyConnect out or a license is required?

Re: how to add AnyConnect to ASA 2100 series

Rob Ingram — Mon, 06 Jan 2020 18:24:48 GMT

On ASA software, I think you should still get a maximum of 2 AnyConnect connect at one time without a license. So you should be able to use that to test. Use the command "show version" from the CLI to confirm the maximum number of AnyConnect clients/peers.

HTH

Re: how to add AnyConnect to ASA 2100 series

kieshansomai1848 — Tue, 07 Jan 2020 13:42:53 GMT

getting this message when I try to download the AnyConnect vpn client software. Where can I download a trial version

Re: how to add AnyConnect to ASA 2100 series

Rob Ingram — Tue, 07 Jan 2020 13:51:44 GMT

In that case, I think you'll have to go via your Cisco Partner and see if they can get you access or the application package.