topic CX module (9.2.1.4(5))Cisco in Network Security

Time Range object missing on PRSM

michalis1234 — Tue, 12 Mar 2019 04:51:14 GMT

Dear All,

I have an ASA 5515X + CX module (9.2.1.4(5)), i use it for url filtering mostly.

I have a request for a url to be blocked only on working hours. I tried to implement that request by creating a time range object, but unfortunately i do not see

that option on PRSM.

Can you please help ...

Thank s in advance,

Are you trying to configure

Marius Gunnerud — Thu, 02 Oct 2014 11:06:05 GMT

Are you trying to configure the ASA or the CX module with the time based access policy?

If you are tyring to configure the CX module then time based access is not supported until 9.3

http://www.cisco.com/c/en/us/td/docs/security/asacx/roadmap/asacxprsm_new_features.html

Please remember to select a correct answer and rate helpful posts

Are you sure because the

michalis1234 — Thu, 02 Oct 2014 12:26:22 GMT

Are you sure because the system image of my cx is later than 9.3.1 and i cannot upgrade it.

The version of my asa 9.1.4

What I shall do ?

Upgrdae the asa and then the cx ?

Which version of PRSM are you

Marius Gunnerud — Thu, 02 Oct 2014 12:43:52 GMT

Which version of PRSM are you running?

Please remember to select a correct answer and rate helpful posts

CX module (9.2.1.4(5))Cisco

michalis1234 — Thu, 02 Oct 2014 12:55:40 GMT

CX module (9.2.1.4(5))

Cisco ASA 9.1.4

For your first question: yes i am trying to configure time range object on the CX in order to allow access to specific urls after working hours.

Then you need to upgrade the

Marius Gunnerud — Thu, 02 Oct 2014 13:09:36 GMT

Then you need to upgrade the CX module. as per the release notes I posted above time based policies are available in 9.3 and higher. You can download the boot and system software from the following sites:

Boot:

http://software.cisco.com/download/release.html?mdfid=284325223&flowid=34503&softwareid=284399946&release=9.2.1-4&relind=AVAILABLE&rellifecycle=&reltype=latest

System:

http://software.cisco.com/download/release.html?mdfid=284325223&flowid=34503&softwareid=284399944&release=9.2.1-4&relind=AVAILABLE&rellifecycle=&reltype=latest

Please select a correct answer and rate helpful answers

You mean that i need to

michalis1234 — Thu, 02 Oct 2014 13:42:34 GMT

You mean that i need to reimage the cx module ?

Which is the process that i need to follow ?