https://community.cisco.com/t5/network-security/schedule-firewall-reboot/m-p/2544250#M234549 <P>I have often issues with the SA520 firewall. Only by reboot does the problems goes away.</P><P>I would like to reboot the firewall on Sundays automatically.</P><P>Can you schedule an automatic reboot of the SA520 firewall?</P><P>Thanks</P> Tue, 12 Mar 2019 04:49:36 GMT fzanvIT01 2019-03-12T04:49:36Z https://community.cisco.com/t5/network-security/schedule-firewall-reboot/m-p/2544250#M234549 <P>I have often issues with the SA520 firewall. Only by reboot does the problems goes away.</P><P>I would like to reboot the firewall on Sundays automatically.</P><P>Can you schedule an automatic reboot of the SA520 firewall?</P><P>Thanks</P> Tue, 12 Mar 2019 04:49:36 GMT https://community.cisco.com/t5/network-security/schedule-firewall-reboot/m-p/2544250#M234549 fzanvIT01 2019-03-12T04:49:36Z https://community.cisco.com/t5/network-security/schedule-firewall-reboot/m-p/2544251#M234557 <P>It is not possible to schedule a periodic reload unless you are running version 9.2(1) or newer which is not supported on the 5520.&nbsp; In 9.2(1) you can use the EEM to schedule periodic reloads.&nbsp;</P><P>But you can schedule a one time specific reboot by using the command <STRONG>reload in</STRONG> or <STRONG>reload at</STRONG>.&nbsp; Reload in starts a timer which counts down to the reload.&nbsp; For example, reload in 5 counts down 5 minutes and then reloads.</P><P>using the reload at command sets a date and time for when the reload should happen.&nbsp; But after the reload you need to reissue the command for the next reload.</P><P>--</P><P>Please remember to select a correct answer and rate helpful posts</P> Fri, 26 Sep 2014 14:20:23 GMT https://community.cisco.com/t5/network-security/schedule-firewall-reboot/m-p/2544251#M234557 Marius Gunnerud 2014-09-26T14:20:23Z