https://community.cisco.com/t5/network-security/outisde-to-inside/m-p/2525001#M234628 <P>&nbsp;</P><P>&nbsp;</P><P>i want to configure nat outside to inside and allow traffice of subnet 172.16.20.0/24 but only outlook traffice allow&nbsp;</P> Tue, 12 Mar 2019 04:48:31 GMT Navaz Wattoo 2019-03-12T04:48:31Z https://community.cisco.com/t5/network-security/outisde-to-inside/m-p/2525001#M234628 <P>&nbsp;</P><P>&nbsp;</P><P>i want to configure nat outside to inside and allow traffice of subnet 172.16.20.0/24 but only outlook traffice allow&nbsp;</P> Tue, 12 Mar 2019 04:48:31 GMT https://community.cisco.com/t5/network-security/outisde-to-inside/m-p/2525001#M234628 Navaz Wattoo 2019-03-12T04:48:31Z https://community.cisco.com/t5/network-security/outisde-to-inside/m-p/2525002#M234629 <P>Hi,</P><P>To create NAT statements , you need to check which version of ASA code are you on ?</P><P>ASA 8.2 + and below or ASA 8.3+.</P><P>You should check for Port Forward NAT:-</P><P>http://www.cisco.com/c/en/us/td/docs/security/asa/asa83/upgrading/migrating.html</P><P>You can check this document for the syntax. If you still have any queries please post back on this and i will be happy to reply.</P><P>Thanks and Regards,</P><P>Vibhor Amrodia</P> Sun, 05 Oct 2014 05:50:18 GMT https://community.cisco.com/t5/network-security/outisde-to-inside/m-p/2525002#M234629 Vibhor Amrodia 2014-10-05T05:50:18Z