topic Hi,Modified your ACL, apply in Network Security

Help setting up static NAT with multiple external IPs using 9.0.3?

eric.hammett — Tue, 12 Mar 2019 04:38:01 GMT

Sorry for the trivial question, but I can't seem to figure out setting up NAT with multiple external IPs (e.g. 1.1.1.3 - 1.1.1.7). I have my outside inteface set to 1.1.1.7, however how do I allow say RDP (tcp 3389) being sent to 1.1.1.3 to be forwarded to 10.0.1.253 on my internal network? Attached is my current config.

Hi,Modified your ACL, apply

SANTHOSHKUMAR SARAVANAN — Thu, 14 Aug 2014 01:51:35 GMT

Hi,

Modified your ACL, apply this it should work

no access-list outside_access_in extended permit object RDP any object HyperV
access-list outside_access_in extended permit tcp any object HyperV eq 3389

HTH

Sandy